Table of Contents
Advertisement
Section 4 - Initial Activation (ATSC Transmitters)
Verification of the temperatures of the modules in each power drawer
In the screen Drawer Measurements [2300], select Temperature. Press ENTER.
To select the drawer use the button
To change the temperature from º C to º F, press and hold
Programming the Power to 10% of rated output
Gradually increase the output power of the transmitter to 10% of the rated output.
In the screen Main Menu [0000], select Setup Menu. Press ENTER.
Manual Rev. 0.1 - February 2018
> >
> >
Use the "
" button to display the remaining items on this menu.
>
>
>
Select Power Setup and press ENTER.
or
.
and
.
4-5
Advertisement
Table of Contents
