Configuring System 2000 Software; Entering Device Properties - Ametek Dycor Dymaxion Mass Spectrometer User Manual

A-8 | Dycor Dymaxion Mass Spectrometer

Configuring System 2000 Software

Entering Device Properties

•
Go to the main menu of the System 2000 software and under "Edit" on
the toolbar select "Device Properties." Select your Dymaxion device
from the sub-menu. The Device Properties screen appears (Figure
A-6).
COM1
57600
Figure A-6.
Device Properties screen.
•
Click on the I/O Setup Tab to set up and name the input and output
channels.
Figure A-7.
Input and output channel setup for I/O option board.
Input tab
• Type in a name for the Analog IN and Digital IN channels (Figure
A-7).
Output tab
• Type in a name for the Analog OUT and Digital OUT channels (Figure
A-7).
128
Dig64
OPTO 22 Digital
Optomux Digital