Advertisement
Quick Links
Winchester - 3+2 Sideboard
Assembly Instructions -
Dimensions
Width - 119.9cm
Depth - 39.4cm
Height - 76.8cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
Please keep for future reference
417/9906
MADE IN
BRITAIN
Issue 1 - 14/07/15
Advertisement
Related Manuals for Argos Habitat Winchester 3+2 Sideboard 417/9906
Summary of Contents for Argos Habitat Winchester 3+2 Sideboard 417/9906
- Page 1 Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928.
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 44kgs. space to layout the parts before recommend the Please lift with care. starting.
- Page 3 Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
- Page 4 Components - Fittings If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly.
- Page 5 Assembly Instructions Step 1 Prepare the 3 drawer fronts Screw 2 metal dowels into each of the drawer fronts Note: Tighten the metal dowels up fully against the panels. Step 2 Prepare the drawer sides Insert a small locking into the hole shown on the left drawer side and the right...
- Page 6 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
- Page 7 Assembly Instructions Step 8 Prepare the left divider Place 3 runners the left divider shown. Slide back the top of runner and use the 2nd hole from the front Finished to fit the 1st screw front edge Slide the runner back the other way and fit the 2nd screw into...
- Page 8 Assembly Instructions Step 9 Prepare the right divider Place 3 runners the right divider shown. Slide back the top of runner and use the 2nd hole from the front to fit the 1st screw Slide the runner Finished back the other way and front edge fit the 2nd screw into...
- Page 9 Assembly Instructions Step 10 Prepare the 2 narrow rails Insert 2 large locking nuts into each of the 2 narrow rails Finished front edge Tap 2 wooden dowels into each of the 2 narrow rails Step 11 Fit the 2 narrow rails onto the right divider Push the 2 narrow rails onto the right divider...
- Page 10 Assembly Instructions Step 13 Prepare the base Insert 4 large locking nuts into the base Tap 2 wooden dowels into the base Finished front edge Step 14 Fit the base Attach the base the left divider right divider with 4 screws Finished front edge...
- Page 11 Assembly Instructions Step 16 Fit the 2 long rails Push the 2 long rails onto the left divider and right divider Use a screwdriver to tighten the 4 large locking nuts fitted to the left divider right divider Step 17 Prepare the left side Screw 6 metal dowels into the left side...
- Page 12 Assembly Instructions Step 18 Prepare the right side Screw 6 metal dowels into the right side Insert 2 large locking nuts into the right side Finished Tap 2 wooden dowels front edge into the right side Fit 2 hinge plates onto the right side , making...
- Page 13 Assembly Instructions Step 20 Prepare the other 2 long rails Finished front edge Insert 2 large locking nuts into each of the 2 long rails Tap 2 wooden dowels into each of the 2 long rails Step 21 Fit the 2 long rails Push the 2 long rails onto the right side Use a screwdriver to...
- Page 14 Assembly Instructions Step 23 Prepare the top Screw 4 metal dowels into the top Rounded front edge Step 24 Polystyrene Fit the top block Note: To make it easier Polystyrene to fit the top and plinths, block place polystyrene blocks from the packaging underneath the side panels to raise the...
- Page 15 Assembly Instructions Step 25 The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Fit the back Square up the unit by making sure that measurement x to x equals y to y.
- Page 16 Assembly Instructions Step 27 Finished top edge Prepare a side plinth Insert a large locking into 1 of the side plinths Tap a wooden dowel into the side plinth Step 28 Prepare the other side plinth Finished top edge Insert a large locking into the side plinth Tap a wooden dowel into the side plinth...
- Page 17 Assembly Instructions Step 31 Fit the plinths Position the 3 plinths onto the assembly ensuring that the bottom edge of the plinths are flush with the bottom edge of the sides, as shown. Secure the 2 side plinths through the left end .
- Page 18 Assembly Instructions Step 33 Fit the shelf studs For each of the 2 shelves , insert 4 shelf studs Step 34 Fit the shelves Lower the 2 shelves down onto the shelf studs...
- Page 19 Assembly Instructions Step 35 Fit the drawers Starting with the bottom drawer, slide both the runners forward and locate the drawer sides between them, lining up the holes in the drawer wrap with the 2nd 'threaded' holes in the runners Working from the inside of the drawer, insert 2 screws...
- Page 20 Assembly Instructions Step 37 Fit doors and handles Note: The easiest way to attach each door to fit the top hinge first, then align and fit the other hinge. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the slot in the hinge plate.
- Page 21 Assembly Instructions Step 38 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
- Page 22 If in doubt, consult an expert. Assembly is complete If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
- Page 24 ALR3162...
Need help?
Do you have a question about the Habitat Winchester 3+2 Sideboard 417/9906 and is the answer not in the manual?
Questions and answers