Advertisement
Quick Links
Lawson - Desk
Assembly Instructions -
Dimensions
Width - 100cm
Depth - 39.5cm
Height - 73.5cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Please keep for future reference
402/4439
412/6416
412/3392
MADE IN
BRITAIN
Issue 3 - 24/07/15
Advertisement
Related Manuals for Argos Lawson 402/4439
Summary of Contents for Argos Lawson 402/4439
- Page 1 Lawson - Desk Assembly Instructions - 402/4439 Please keep for future reference 412/6416 412/3392 Dimensions Width - 100cm Depth - 39.5cm MADE IN Height - 73.5cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800 Issue 3 - 24/07/15...
-
Page 2: Care And Maintenance
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 20kgs. space to layout the parts before recommend the Please lift with care. starting. - Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 03456 400800 quoting the reference numbers below Please check you have all the panels listed below Left End Upright Right End (DF2766) (DF2767) (DF2768) (716 x 392mm) (716 x 392mm) (716 x 392mm) Base...
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 03456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
- Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 03456 400800 quoting the reference numbers below Step 1 Prepare the upright Screw 4 metal dowels into the upright Note: Tighten the metal dowels up fully against the panels.
- Page 6 Assembly Instructions Step 3 Fit a base to the upright Push a base onto the upright Use a screwdriver to tighten the 2 large locking nuts fitted to the upright Finished Finished Note: Turn the large front edge front edge locking nuts as far as they will go - more than...
- Page 7 Assembly Instructions Step 6 Fit the left end Push the left end onto the 2 base panels Use a screwdriver to tighten the 2 large locking nuts fitted to each of the 2 base panels Finished front edge Step 7 Prepare the modesty Finished top edge...
- Page 8 Assembly Instructions Step 9 Finished top edge Fit the modesty Push the modesty onto the upright Use a screwdriver to tighten the 2 large locking nuts fitted to the modesty Note: Support the modesty until the right end has been fitted in the next step.
- Page 9 Assembly Instructions Step 12 Fit the top Push the top onto the assembly. Use a screwdriver to tighten the 6 large locking nuts fitted to left end , upright and right end Step 13 Fit the back The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Square up the unit by making sure that...
- Page 10 Assembly Instructions Step 14 Fit the 6 plastic nails Tap 2 plastic nails into the bottom edge of each of the left end upright and right end Carefully stand the unit up for the next step. Warning: The unit is heavy. Lift with care.
- Page 11 Assembly Instructions Step 17 Fit the door stop Push the remaining shelf stud up into the hole in the corner of the upper base to act as a door stop. Step 18 Prepare the door Push fit 2 hinges into the door Secure each hinge with 2 screws...
- Page 12 Assembly Instructions Step 19 Fit door and handle Note: The easiest way to attach the door is to fit the top hinge first, then align and fit the other hinge. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the slot in the hinge plate.
- Page 13 Assembly Instructions Step 20 Adjust the door if needed Before adjusting the door, use a spirit level to check the top (or base) of the unit is level, front- to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any...
- Page 14 Step 21 Assembly is complete If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW...
- Page 16 ALR3189...
Need help?
Do you have a question about the Lawson 402/4439 and is the answer not in the manual?
Questions and answers