Paxton Switch2 Ins-30010 Quick Start Manual
Hide thumbs
Also See for Switch2 Ins-30010:
- Installation manual (29 pages) ,
- How to program (4 pages) ,
- How to install (3 pages)
Advertisement
Quick Links
22/01/2013
Ins-30010 Switch2 control unit
Technical Support
01273 811011
Technical help is available:
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Quickstart guide
This supplement is a brief guide to installing a Switch2 system. Further information is available for download at:
http://paxton.info/45
or call the communications team on: 01273 811011.
Wiring
Reader
(for Paxton exit buttons
GREEN and RED wires go
to reader terminals)
To change a reader port voltage to 5V, move the red jumper(s) located beneath the wiring label to the 5V setting.
Fail open locks
For a fail open lock (Maglock), wire 0V to the "N.C." terminal instead of "N.O."
This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person.
support@paxton.co.uk
Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
Switch2
12V
Red LED
Amber LED
Green LED
Data
Clock
Media Detect
http://paxton.info/107
PLACE SERIAL
0V
NUMBER
123456
Contact
LABEL HERE
Exit
Exit button
Black/0V and Exit
(push to make)
Bell
12V
0V
N.C.
N.O.
COM
Fail closed release
Paxton
*
Page 1
Advertisement
Related Manuals for Paxton Switch2 Ins-30010
Summary of Contents for Paxton Switch2 Ins-30010
- Page 1 Monday - Friday from 07:00 - 19:00 (GMT) Saturday from 09:00 - 13:00 (GMT) Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/ Quickstart guide This supplement is a brief guide to installing a Switch2 system. Further information is available for download at: http://paxton.info/45...
- Page 2 INITIALISING A NEW SYSTEM The first time the system is powered up the control unit will beep 3 times a second. This indicates the unit needs programming. There are 3 programming options: Using tokens only (CARDLOCK or PROXIMITY) see Section 1 Using codes only (TOUCHLOCK) see Section 2 Using tokens and PIN/codes (CARDLOCK/PROXIMITY with TOUCHLOCK)
- Page 3 START - Enter the 6 digit Programming Code and hold down a function key for 3 seconds. - The unit beeps and the LED flashes faster. Continue the key sequence to set the option - The keypad returns to operating mode. Enter user code Set a Re-enter...
- Page 4 Technical Help Here is the list of topics about this product that receive the most technical support enquiries. We list them here to help you speed up the installation and trouble shooting process. 1 - How to reset the controller. Q- See Main Text 2 - Two readers on the same controller.
Need help?
Do you have a question about the Switch2 Ins-30010 and is the answer not in the manual?
Questions and answers