NETGEAR GS105v5 Installation Manual

Installation Guide
5-Port and 8-Port
Gigabit Ethernet
Unmanaged Switch
GS105v5 and GS108v4
Package contents
• Gigabit Ethernet switch
• Power adapter (varies by region)
• Wall-mount kit
• Installation guide
July 2019
1. Register with the NETGEAR Insight app
1. Search for NETGEAR Insight and download the latest app.
2. Set up a NETGEAR account if you do not have one.
3. Tap the menu in the upper-left corner.
4. Tap REGISTER ANY NETGEAR DEVICE.
5. Enter the serial number located on the bottom of the switch, or use the
camera on your mobile device to scan the serial number bar code.
6. Tap GO.
The switch is registered and added to your account. You can now view the
switch in the NETGEAR Insight app.
Note: Because this is an unmanaged switch, you cannot configure or manage
it in NETGEAR Insight.
2. Connect the switch
Access
point
Desktop
Smart TV
Sample connections
3. Check the LEDs
LED Description
Power • On. The switch is receiving power.
• Off. The switch is not receiving power.
Port • Both LEDs are solid green. 1000 Mbps link on this port.
(left and right)
• Left LED is solid green. 100 Mbps link on this port.
• Right LED is solid green. 10 Mbps link on this port.
• Blinking green. The port is sending or receiving traffic.
• Off. The switch does not detect a link on this port.
GS108v4
Router
Internet
ReadyNAS
Gaming
console