Page 1
3M SQUARE CANTILEVER UMBRELLA Assembly Instructions Item No. 3191028 Warning: When assembling and using this product, safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all instructions before assembly and use. Some parts may contain sharp edges, wear protective gloves if necessary.
Page 2
3M SQUARE CANTILEVER UMBRELLA Assembly Instructions PARTS AND HARDWARE LIST CODE PARTS CODE PARTS Metal Cross Base Plastic Cone Metal Cross Base Umbrella frame & Canopy 360°Swivel System crank Screw with plastic cap Umbrella Base Allen Key (M10) Screw Washer Stay Pole Umbrella Cover...
Page 3
Fix the 360°swivel system(C) with the metal cross base(A+B). Then fix the umbrella base(D) with 360°swivel system(C) by screw(E). Place the plastic cone (F) onto umbrella base (D). Place the umbrella frame & canopy (G) onto the umbrella base pole (D). Fix screw with plastic cap (I) on umbrella base (D) &...
Page 4
Assembly instructions Squeeze the handle and push it in the upwards direction towards the top of the umbrella pole until it locks into place. Open the umbrella by rotating the crank. To adjust the angle of the umbrella, slide the handle down the pole.
Need help?
Do you have a question about the 3M SQUARE 3191028 and is the answer not in the manual?
Questions and answers