Advertisement
Quick Links
3.5M ANDAMAN CANTILEVER UMBRELLA
Please carefully read the below warnings and instructions. Save the
!
instructions for future reference.
1.Please carefully read all instructions before assembly and use
2.Please separate and identify all parts, ensuring that you have all parts listed
3.To avoid damaging your umbrella, it is recommended that you assemble it on a clean, protected surface
4.Washers must be used when indicated during the assembly process
5.Loosely tighten the nuts and then securely tighten when all are in position. Be careful not to over tighten the
nuts during assembly.
PARTS LIST
CODE
A
B
C
D
E
F
G
Assembly Instructions
Item No. 3191785
QTY.
PARTS
1PC
Frame & Canopy
1PC
Plastic Base
1PC
Housing Cover
1PC
Square Tube
1PC
Rotary Knob
1PC
Stay Pole
1PC
Umbrella Cover
HARDWARE LIST
CODE
PARTS
H
Screw & Washer
I
Allen Key
J
Crank
QTY.
4PCS
1PC
1PC
10-1
Advertisement
Related Manuals for Mimosa 3191785
Summary of Contents for Mimosa 3191785
- Page 1 3.5M ANDAMAN CANTILEVER UMBRELLA Assembly Instructions Item No. 3191785 Please carefully read the below warnings and instructions. Save the instructions for future reference. 1.Please carefully read all instructions before assembly and use 2.Please separate and identify all parts, ensuring that you have all parts listed 3.To avoid damaging your umbrella, it is recommended that you assemble it on a clean, protected surface...
- Page 2 Assembling Instruction Fix the square tube (D) with Place the plastic circle（C） the plastic base (B) using onto umbrella base pole. screw & washer (H). Fill the base with water or Place the frame & canopy （A） onto sand to make it stable. the umbrella base pole, using rotary knob (E) to fix.
- Page 3 Operating Instruction HOW TO OPEN AND ADJUST THE UMBRELLA Squeeze the handle and push it in the upwards direction towards the top of the umbrella pole until it locks into place. Open the umbrella by rotating the crank clockwise. Vertically adjust height as required.
- Page 4 Operating Instruction Click to tilt umbrella angle as you like （approx 90 degree of each side）. 10-4...
- Page 5 Operating Instruction HOW TO RELOCATE YOUR UMBRELLA Open the handle cover to expose the pulling handle and winding mechanism Remove the crank handle from the pole and insert into the base winding mechanism. Unwind the handle and cord 10-5...
- Page 6 Operating Instruction Now that the handle and wheels are fully extended, the umbrella base can be easily pulled to your new location Do not attempt to pull your umbrella up a steep slope or grassed surface. 10-6...
- Page 7 Operating Instruction Once the umbrella base is in the desired location, wind up the cord and handle and store in base. Retract the wheels by winding the handle in an anti-clockwise direction. Remove the handle and replace in its original position in the upright pole.
- Page 8 Operating Instruction HOW TO CLOSE THE UMBRELLA Close the umbrella frame by rotating the handle counter-clockwise. Close the total frame & canopy by moving the crank downwards to the lowest position hole. 10-8...
- Page 9 Operating Instruction Assemble the stay pole （F）. Lift the umbrella cover (G) to the top of the umbrella using the stay pole (F). Pull the umbrella cover (G) down over the umbrella with your hands. 10-9...
-
Page 10: Care And Cleaning
Operating Instruction Once it has fully covered the umbrella,pull the zip closed and put the stay pole in the protective bag. ATTENTION: DO NOT use in extreme weather conditions including high wind and heavy rain. CARE AND CLEANING: 1. To clean, wipe with damp cloth. Do not use bleach, acid solvents or abrasive cleaners. 2.
Need help?
Do you have a question about the 3191785 and is the answer not in the manual?
Questions and answers
instructions please on how do you replace the cover when it is torn and no good
To replace the torn cover on a Mimosa 3191785 umbrella:
1. Remove the Existing Cover: Pull the current umbrella cover down over the umbrella and unzip it completely.
2. Prepare the New Cover: Ensure the new cover (G) is ready for installation.
3. Use the Stay Pole: Lift the new umbrella cover (G) to the top of the umbrella using the stay pole (F).
4. Secure the Cover: Pull the cover down over the umbrella with your hands.
5. Close the Cover: Once fully in place, pull the zip closed.
6. Store the Stay Pole: Place the stay pole (F) in its protective bag.
Ensure the umbrella is not used in extreme weather conditions after replacement.
This answer is automatically generated