Turning The System On Or Off - Hyundai i10 Owner's Manual

Convenient features
Information
i
- About handling the system
• Do not apply excessive force to the
system. Excessive pressure on the
screen may damage the LCD panel
or the touch panel.
• When cleaning the screen or button
panel, make sure to stop the engine
and use a soft, dry cloth. Wiping the
screen or buttons with a rough cloth
or using solvents (alcohol, benzene,
paint thinner, etc.) may scratch or
chemically damage the surface.
• If you attach a liquid-type air fresh-
ener to the fan louvre, the surface of
the louvre may become deformed
due to the flowing air.
• If you want to change the position of
the installed device, please inquire
with your place of purchase or ser-
vice maintenance center. Technical
expertise is required to install or
disassemble the device.
NOTICE
• If you experience any problems
with the system, contact your
place of purchase or dealer.
• Placing the infotainment system
within an electromagnetic envi-
ronment may result in noise
interference.
5-104

Turning the system on or off

To turn on the system, start the
engine.
• If you do not want to use the system
while driving, you can turn off the sys-
tem by pressing the [POWER] button
on the control panel. To use the sys-
tem again, press the [POWER] but-
ton again.
After you have turned off the
engine, the system will automati-
cally turn off after a while or as
soon as you open the driver's door.
• Depending on the vehicle model or
specifications, the system may turn
off as soon as you turn off the engine.
• When you turn back on the sys-
tem, the previous mode and set-
tings will remain intact.
WARNING
• Some functions may be disa-
bled for safety reasons while the
vehicle is moving. They work
only when the vehicle stops.
Park your vehicle in a safe loca-
tion before using any of them.
• Stop using the system if it mal-
functions, such as no audio out-
put or display. If you continue
using the system when it is mal-
functioning, it may lead to a fire,
electric shock, or system failure.
Information
i
You can turn on the system when the key
ignition switch is placed in the "ACC" or
"ON" position. Using the system for an
extended period without the engine run-
ning drains the battery. If you plan on
using the system for a long time, start the
engine.