LIGHTING
Exterior lights
Lighting control
To operate the lights, turn the knob at
the end of the control lever to one of
the following positions:
(1) OFF (O) position
(2) AUTO light position (if equipped)
(3) Position light position
(4) Headlight position
AUTO light position (if equipped)
When the light switch is in the AUTO
OAC3059022TU
OAC3059022TU
position, the position light and head-
light will be turned ON or OFF auto-
matically depending on the amount of
light outside the vehicle.
Even with the AUTO light feature in
operation, it is recommended to man-
ually turn ON the lights when driving
at night or in a fog, or when you enter
dark areas, such as tunnels and park-
ing facilities.
NOTICE
• Do not cover or spill anything on
the sensor (1) located on the
instrument panel.
• Do not clean the sensor using a
window cleaner, the cleanser
may leave a light film which
could
operation.
• If your vehicle has window tint
or other types of metallic coat-
ing on the front windshield, the
AUTO light system may not
work properly.
OAC3059024TU
OAC3059024TU
interfere
with
05
sensor
5-37
Need help?
Do you have a question about the i10 and is the answer not in the manual?
Questions and answers
Is there a fuse for the wash water pump. Hyundai i10. 2009
The fuse panel descriptions mention fuses for the front washer motor and rear washer motor, which are part of the front wiper motor and rear wiper motor circuits. Specifically, the FRT WIPER 25A fuse protects the front washer motor, and the RR WIPER 15A fuse protects the rear washer motor. Therefore, the wash water pump is protected by these fuses.
This answer is automatically generated