Samsung C61R1AAMST Service Manual page 18

4-2-3
Connect the sensor.
Replace the wire.
Connect the wire
properly.
NO
After Power -> On, does
the symptom continue?
Replace the Assy Touch PCB.
Top Sensor Open Error (
NO
Is the sensor connected?
NO
NO
Is the sensor's real resistance is
S/W Error
YES
Perform the operation again and check
YES
Is the sensor wire
connected properly
by burner position?
YES
opened circuit?
YES
The sensor has defect.
Replace the sensor.
if it is working properly.
- 16 -
)
: check if the sensor wire is damaged,
if the sensor housing is inserted into
the connector of the PCB.