Samsung C61R1AAMST Service Manual page 13

3-5 Replacement of the Assy-Induction Module
Parts
Assy-Induction
Module
Explanation Photo
Screw Screw
pull pull
Screw Screw
L-marking L-marking
Blue color connector
Blue color connector
White color White color
connector connector
R-marking R-marking
- 11 -
Explanation
5. Remove the 2 screw.
6. Pull the Assy-Inverter Module(L,R)
toward left or right side.
7. Replace the Assy-Inverter
Module(L,R).
8.Arrange Assy-Inverter Module(L,R) to
proper position.
(Please see the picture.)
9. Connect the sub-wire with matched
color position.
(Please see the picture.)
10.After replacement, arrange all wire
properly by using Holder-Wie
Saddle.
11. Especially, wire of Assy-Inverter
Module(L,R) must be secured to
proper position by using Cable
Clamp. (See the picture)