General Information; Default Codes; Initial Power Up; Testing The Keypad - Pyronix Castle EURO 46 Series Programming Reference Manual

3 . G e n e r a l I n f o r m a t i o n
Please note that the number of areas, codes, inputs and outputs shown in this manual may differ to the
EURO control panel that is being used. Refer to 'System Overview' on page: 4 to see the maximum areas,
codes, inputs and outputs for each variant of the EURO control panel range.

3.1 Default Codes

User: 1234.

3.2 Initial Power Up

Power up the EURO control panel, an alarm will be generated.
1. Once power has been applied to the EURO control
panel, 'Please Wait' and then '485 Comms Lost' will
be displayed. After approximately one minute, the
LCD display will show th time on the display.
2. If only one LCD keypad is installed, this will be
addressed as 00 automatically.
NOTE: The wording 'EURO MERIDIAN' can be changed in the function 'SYSTEM DISPLAYS'(page:20).

3.3 Testing The Keypad

With the system unset, press the key for 10 seconds at any keypad. This will cause all the LEDs
on that keypad to illuminate, and the LCD screen to scroll a display testing each pixel. The keypad
will revert to normal display approximately 10 seconds after the key is released.

3.4 Keypads / Readers

3.4.1 The Keypad
Additional keypads can be connected to the EURO control panel. Refer to the system overview
section (page: 4) for the maximum number of keypads that can be installed. Refer to the
installation manual (RINS1529) for connections details.
KEY FUNCTIONS:
a = Exit manager menu / Selects Area A.
b = Moves backwards to the previous
menu item / Selects Area B.
c = Enables chime and displays
additional information in the log / Scrolls
back 'one' in a sub menu / Selects Area C.
D = Moves forward in the log / scrolls
between options and enters the master
manager menu /Selects Area D.
I = Selects items and enters menus.
A = Cancels items, resets the panel and
moves to next item in a menu item.
NOTE: If any additional keypads are installed on the EURO control panel, it is possible to access
the Engineer menu on any keypad. For example, if the Engineer menu is accessed on keypad
address 0, the other keypads will display 'system busy', to access the Engineer menu on any
other keypad, press the  key on the relevant keypad and the Engineer menu will be
displayed.
Addressing Keypads
To address further keypads on the EURO control panel, press and hold the D key until
'SECURITY CODE' is displayed. Enter '2000' and choose the relevant address and press the A
key. Please refer to the installation manual (RINS1529) for all connection details.
EURO 46, 162 & 280 Programming Manual
Master Manager: 2222
Page: 7
Engineers: 1111
Please Wait...