Using The Image Stabilizer - Canon 8x20 IS Instructions Manual

Using the Image Stabilizer

When you look through the binoculars, the image may be shaking and difficult
to see since your hands are holding the binoculars. In such a case, the Image
Stabilizer can help steady the image.
The Image Stabilizer can be operated using the following methods.
Starting and stopping Image Stabilizer operation while
holding down the button
• The Image Stabilizer will operate while holding down the Image Stabilizer
button.
• The Image Stabilizer will stop once you let go of the button.
When the Image Stabilizer button is operating, the lamp turns on.
z
If the lamp does not turn on, replace the batteries with new ones.
z
The Image Stabilizer may not be able to compensate when the user's
z
body is being deeply shaken, subjected to vibration, or when the user's
hands are shaking too much.
The Image Stabilizer will stop once the batteries run out.
z
Even without batteries loaded, the binoculars can still be used as is.
z
Five-minute operation and
stopping operation
• Press the Image Stabilizer button and
quickly let it go, and the Image Stabilizer
will operate continuously for five
minutes.
• To stop the Image Stabilizer, press and
release the Image Stabilizer button
again.
ENG-10