Sealey AP850MB Instructions

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instruction
manual
1. saFety
warNiNG! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this trolley.
‰
Always load evenly with the centre of gravity of the load as near centre of the trolley as possible.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the trolley clean and tidy in accordance with good workshop practice.
9
use the wheel locks to prevent the trolley from inadvertently moving.
9
Keep children and unauthorised persons away from the work area.
9
open one drawer at a time - unit may become unstable if multiple loaded drawers are open
9
store out of reach of children and untrained people.
9
maintain a safe working environment. make sure there is adequate surrounding workspace.
9
do Not overload the trolley. max capacity 260kg. overloading can damage the drawers and/or castors and could result in tipping and
8
personal injury. Beware of dynamic loading. dropping or bouncing a load may briefly create excess load causing damage, personal injury
and/or death.
do Not use the trolley for any purpose other than that for which it is designed.
8
do Not stand on the trolley, use it as a ladder or allow others to ride on the trolley.
8
do Not leave unattended, especially when loaded, unless the wheels are locked, chocked or the trolley otherwise secured. Keep the
8
lid and drawers closed and locked when not in use.
do Not use trolley on uneven ground not capable of withstanding its weight. do Not run over curbs or steps - use a ramp.
8
do Not use trolley if any part is significantly damaged, paying particular attention to the wheels.
8
do Not wear loose clothing and contain long hair.
8
do Not use in a wet or damp location.
8
Note! the assembly will require assistance.
2. iNtroductioN
Garage and workshop trolley with an overall capacity of 260kg. lined upper shelf features a perforated hand tool storage section on each side,
further hand tool storage slots are situated externally on both sides of the trolley. lined lower shelf is ideal for larger parts or tool storage. four
drawers with non-slip liners and ball bearing runners feature a rear locking mechanism which engages once the lockable top lid is closed, adding
extra security. fitted with a side handle and four swivel castors, two with brakes, to aid manoeuvrability.
3. speciFicatioN
model no: ............................................................... AP850mB
total load capacity: ...................................................... 260kg
overall size W x d x H: ...........................855 x 450 x 950mm
lower tray: ................................................760 x 405 x 80mm
upper tray: ..............................................685 x 405 x 105mm
small split drawer x2: ................................315 x 355 x 50mm
medium drawer x1: ....................................660 x 355 x 80mm
large drawer x1: .....................................660 x 355 x 100mm
4. coNteNts
Part description
1 right leg post
2 Ball type bolts m8 x 12
3 spring washer
4 nut
5 upper tray/drawer unit
6 left leg post
7 Push handle
© Jack sealey limited
instructions for
heavy duty mobile tool & parts trolley
with 4 drawers & lockable top - black
ap850mb
model no:
Qty. Part description
2 8 Ball type bolts m8 x 16
34 9 support frame
52 10 locking caster
52 11 Bottom tray
1 12 swivel caster
1 13 Bolts m8 x 16
1 14 cap
Original Language Version
.
refer to diagram overleaf
Qty.
2
2
2
1
2
16
2
AP850mB| issue 1 20/01/17