Samsung Galaxy S7 edge Instruction Manual page 87

For ntt docomo
Hide thumbs Also See for Galaxy S7 edge:
Table of Contents

Advertisement

Notes on holding over the device
Please note the following when holding the terminal over an IC card reader
or NFC module equipped device.
• Bring the
mark close to the device slowly, not strike strongly.
• Hold the
mark over the device at the center horizontally. If scanning
is failed even with it held in front of the center of the scanner, slightly lift
up the terminal, or move it backwards/forwards or to the left/right.
• When there is a metal object between the
reading may fail. Putting the terminal into a case or cover may affect
communication. In that case, remove the case or cover.
Locking Osaifu-Keitai function
Use "NFC/Osaifu-Keitai Lock" to restrict Osaifu-Keitai function or the
services. NFC/Osaifu-Keitai lock is different from the screen lock and SIM
card lock.
1
From the Home screen, "Osaifu-Keitai"
2
"Lock Settings" → "NFC/Osaifu-Keitai Lock" →
the password → "OK"
• Setting password is required for the first activation. Follow the
onscreen instructions to set password.
• To unlock, "Lock Settings" → "NFC/Osaifu-Keitai Lock" →
the password → Tap "OK"
mark
mark and the device,
→ Enter
→ Enter
Information
• When using "NFC/Osaifu-Keitai Lock",
• Be careful about remaining battery level because "NFC/Osaifu-Keitai
Lock settings" cannot be canceled if the battery runs out while using
"NFC/Osaifu-Keitai Lock". If the battery runs out, charge the battery and
then cancel "NFC/Osaifu-Keitai Lock".
• To use Osaifu-Keitai menu while using "NFC/Osaifu-Keitai Lock", unlock
"NFC/Osaifu-Keitai Lock".
• A password for NFC/Osaifu-Keitai cannot be deleted even if the terminal
is reset.
• Unlock "NFC/Osaifu-Keitai Lock" with the docomo nano UIM card used at
the time when "NFC/Osaifu-Keitai Lock" is set inserted to the terminal.
iD アプリ (iD application)
"iD" is electric money provided by docomo. You can enjoy shopping simply
and conveniently only by holding Osaifu-Keitai set with "iD" over the IC card
reader in stores. Since up to 2 types of card information can be set, you
can use them separately according to the benefits, etc.
• To use iD with Osaifu-Keitai, setting iD application is required.
• The charges required for iD service (including the annual charge) vary by
card issuer.
• The packet communication charge for overseas use differs from the one
in Japan.
• For details on iD, refer to iD website (http://id-credit.com/) (In Japanese
only).
Tap & Pay
You can enable or disable services, such as Osaifu-Keitai-compatible
services, that can be used by holding the terminal over a reader.
• For the retail of Tap & Pay, refer to Help.
1
From the Home screen,
Keitai settings"
2
"Tap and pay"
• To show Help, from Tap & Pay screen,
85
or
appears on the status bar.
→ "Settings" → "NFC/Osaifu-
→ Tap "Help".
Apps

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-02h

Table of Contents