Samsung Galaxy S7 edge Instruction Manual page 111

Airplane mode
Disable all wireless connections.
1
From the Home screen,
2
Information
• Alternatively, tap "Airplane mode" on the notification panel to switch
setting.
• If you enable "Airplane mode", Wi-Fi, Bluetooth, and functions of the
NFC such as reader/writer, P2P, etc. turn OFF. However, you can turn
them ON again during Airplane mode.
→ "Settings" → "Airplane mode"
Using tethering
Tethering is a function which uses a mobile device such as smart phone
as modem to connect wireless LAN devices, USB compatible devices and
Bluetooth compatible devices to Internet.
• Up to 10 devices can be connected using Wi-Fi tethering at one time, 1 device
can be connected using USB tethering, and up to 3 devices can be connected
using Bluetooth tethering. When you use Wi-Fi tethering, USB tethering and
Bluetooth tethering at one time, 14 devices in total can be connected.
■ Setting Wi-Fi tethering
You can use your terminal as an Internet access point and connect at
most 10 wireless LAN devices to Internet.
1
From the Home screen,
"Wi-Fi tethering"
2
• After the precautions are displayed, confirm them and tap "OK".
■ Setting access point for Wi-Fi tethering
1
From the Home screen,
"Wi-Fi tethering"
2
• After the precautions are displayed, confirm them and tap "OK".
3
"MORE" → "Configure Wi-Fi tethering"
4
Tap "Network name" field → Input the network name
• "AndroidAP" is set in advance.
5
Tap "Security" field
• Select a proper setting from "Open" and "WPA2 PSK".
6
Tap "Password" field → Enter password
• Password is not required if you set "Open" in "Security".
7
"SAVE"
109
→ "Settings" → "Tethering" →
→ "Settings" → "Tethering" →
Settings