Preparing The Ump Iii; Power On - Ambient UMP III Instruction Manual

Preparing the UMP III

Push the battery lever on the bottom in and slide right (direction MIC connector)
-
Insert battery with the polarity protection gap to the left when looking at the
-
front
Close the door and push back to the left
-

Power on

Plug in the Mic In cable. The device can only be switched on with the Mic In cable
connected.
Press the button until the LED turns from red to green, release. The LED will now display
the current power setting.
Schleissheimer Straße 181 C | DE – 80797 Munich | phone +49 89 360 55 10-0 | www.ambient.de/en | info@ambient.de
© 2020, Ambient Recording GmbH