Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ambient UMP II
Summary of Contents for Ambient UMP II
- Page 1 Universal Microphone Power Supply UMP II Instruction Manual experience quality.
-
Page 2: Table Of Contents
Purchased Parts Package Safety Instructions Product Description Start Up Select Phantom 48/ 12V Insert Batteries Assembling the UMP II to the Mounting Plate (QWB) Connection to a Microphone Connection to an Audio-Transmitter LED - Display Technical Data Wiring Information UMP-EMC... -
Page 3: Purchased Parts Package
Have a look to the right polarity when you change the batteries. If the UMP II will not be used for an extended period, remove the batteries. Switch off the UMP II before you put out the batteries and when you don’t need ©2014, Ambient Recording GmbH... -
Page 4: Product Description
UMP II Product Description Battery status indicator Modus indicator MIC-Input 4-pin mini XLR male connector for microphone OUT-Output 3-pin mini XLR male connector for audio transmitter Selector switch Phantom - OFF - T-power Switch Phantom 48V or 12V Switch Phantom 48V or 12V... -
Page 5: Start Up
PCB. Insert Batteries The UMP II is powered by two 1.5Volt AA-batteries. Open the battery flap and insert the batteries. Look to it that the polarity of the batteries is right. -
Page 6: Connection To A Microphone
UMP II Connection to a Microphone Connect the UMP II with the delivered cable (4-pin mini XLR female to 3-pin XLR female) to the condenser microphone. 4-pin mini XLR to MIC-input of UMP II, 3-pin XLR to the microphone Connection to an Audio-Transmitter... -
Page 7: Led - Display
Battery OK, Phantom 12V (yellow LED) Battery OK, T-Power (green LED) LOW Battery, (Phantom 48V) The “Mode” LED just light up when the microphone is connected and the selector switch is adjusted to „PH” or „T“. ©2014, Ambient Recording GmbH... -
Page 8: Technical Data
UMP II Technical Data Connectors: Microphone: 4-pin mini XLR male (panel jack) Audio-transmitters: 3-pin mini XLR male (panel jack) Compatibility to Audio-transmitters: Full compatible to all transmitters Compatibility to Condenser-Microphones: Full compatible to all condenser-microphones. Microphone power supply: Phantom 48Volt... -
Page 9: Wiring Information
... bridge 1-4 not applied for Lectrosonics non-servo-bias inputs Cable: Per2x0.14CP Length: connector end to connector end 16,5 cm UMP-OUT/6L TA3F to 6-pin Lemo … for Audio LTD 20xx Cable: Per2x0.14CP Length: connector end to connector end 16,5 cm ©2014, Ambient Recording GmbH... -
Page 10: Ump-Out/3.5
UMP II UMP-OUT/3.5 TA3F to 3,5mm TRS … for Sennheiser „Evolution“-serie … for Sony UTX Cable: Per2x0.14CP Length: connector end to connector end 16,5 cm UMP-OUT/3L TA3F to 3-pin Lemo … for Sennheiser „SK“-serie … for Zaxcom TRX900 Cable: Per2x0.05... - Page 11 MADE IN GERMANY Ambient Recording GmbH Schleissheimer Straße 181 C | D – 80797 Munich | vox +49 89 36005510-0 | fax +49 89 651855 www.ambient.de/en info@ambient.de © 2014, Ambient Recording GmbH...
Need help?
Do you have a question about the UMP II and is the answer not in the manual?
Questions and answers