Table of Contents
Advertisement
Password
If units with user name/password set appear within the list display, the user name/password for those
units must be entered.
Enter when communicating with AN-LS1
When communicating with AN-LS1, when a dialog prompting input of user name/password is displayed
as shown below, enter the user name and password set at the unit side, enter a check mark in the
"Save this password" box, as required, and click "OK".
Inputting in advance
It is possible to enter the user name/password in advance.
1
Downloaded from:
http://www.usersmanualguide.com/
Click the subject unit.
40
Advertisement
Table of Contents
