HIKVISION DS-KH6320-LE1 Configuration Manual page 45

Device Network Configure
In the devices network configuration page, you can configure the network
parameters of master stations, SIP servers and management centers of the same
LAN. The devices can be linked to the door station and realize the linkage between
these devices.
Steps
1. Click Device Network Config to enter the settings page.
2. Select the Device Type according to your need.
3. Set the Community No., Building No., Unit No., Floor No. and Room No.
4. Enter the master station IP address, (main) door station IP address, SIP server IP
address, management center IP address, and doorphone IP address.
5. Select the main door station type from the drop-down list.
6. Click Save to enable the settings.
Note
• After adding master station IP Address, the linkage between indoor station
and master station can be realized.
• After adding the door station IP Address, the video intercom between indoor
stations of same building can be realized.
• After adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor stations of different building, calling indoor
station from outer door station and video intercom between management
center and indoors.
Network Indoor Station Configuration Guide
Figure 3-18 Device Network Configure
34