Password Settings - HIKVISION DS-KH6320-LE1 Configuration Manual

Note
• Zones are configurable on the arming mode page.
• 24H alarm zone including smoke detector zone and gas detector zone will be
triggered even if they are disabled.
• Arming mode settings should be configured with the settings of arming
status on the user page of the device.

2.4 Password Settings

You can edit the duress code, unlock password and arm/disarm password of the
indoor station.
You can edit the arm/disarm password of the indoor extension.
Steps
1. Tap Settings →
2. Tap Unlock Password, Arm/Disarm, or Duress Code to pop up the password
settings dialog box.
Unlock Password
Enter the unlock password and room No. on the door station to open the
door.
Arm/Disarm
Create an arm/disarm password before configuring alarm parameters.
Network Indoor Station Configuration Guide
to enter the password settings page.
Figure 2-12 Password Settings
11