Removing The Drawer - Whirlpool WD 142 IX Instructions For Use Manual

REMOVING THE DRAWER

The drawer can be removed in order to clean the
inside.
Open the drawer fully (see pic. 1)
Undo the 2 front screws (1 on each side) - (pic. 2)
Lift the 2 hooks (1 on each side) - (pic. 3-4)
Hold the front part of the drawer on both sides,
because the rear part of the side guides has been
lubricated.
Remove the drawer by carefully lifting it upwards
(pic. 5) and put it down.
The inside of the appliance can now be cleaned,
using water and detergent.
Do not place the drawer in the water once it has
been removed.
REFITTING the drawer
To refit the drawer, carry out the removal
procedure in reverse order.
To do this, place the drawer of the guides.
NB:
There is a fixing hook on the left and right side
under the warming drawer.
The drawer can be opened only if the fixing hook
is in the correct position.
11
Pic. 1
Pic. 2
hook
Pic. 3
hook
Pic. 4
drawer
side guide
Pic. 5