Set Time Of Day; Set Water Hardness - Monarch Water Ultimate Series Installer/User Manual

0. SET TIME OF DAY

• Wait until display says Time of Day. If Time of Day is
correct, skip to P. SET HARDNESS.
• Press Up button to show flashing Hours. Please note it is a 24hr clock.
• Press Up or Down button to set Hours.
• Press@to confirm Hours.
• After confirming Hours with(), display will show minutes flashing.
• Use Up and Down button to set Minutes.
• Press@to confirm Minutes.
P. SET WATER HARDNESS
• Wait until display changes to Hardness.
• Press Up Button to show Set Hardness with no flashing.
• Use Up Button to set number as determined by your water hardness test.
• Press@to confirm setting.
Up to 30 drops
31 - 35 drops
36 - 40 drops
41 - 45 drops
46 - 50 drops
• You have finished the programming.
• The display will now automatically revert back to the alternating display.
• If at any time you need to reset any figure, wait until the display changes to the
relevant setting and then re-programme as required.
Q. FLUSH SOFTENER - IMPORTANT
• Place Rapid-Fit bypass in Service position by pushing plunger as per directional
arrow - see Pie B previous page.
• Check for leaks.
• Leave a soft mains tap e.g. bathroom wash hand basin, to run for a minimum of
5 minutes to purge any air and 'resin dust' from the softener (resin dust may
appear orange in colour).
• Fill the softener with Tablet salt only (we recommend Monarch Ultimate tablet
salt), to within 2-3" from the top of the cabinet. On Maxima GS models we do
not recommend the softener is filled more than 213
unnecessary pressure on cabinet walls. The water softener is a 'dry salt
softener' therefore will set its own level of water in the cabinet during the
automatic regeneration.
• On MiniAqua HE, Midi HE & Master HE, add 1 litre of water to the salt
compartment on initial installation only. For both GS models add 2 litres.
If at any time you see excess water in the salt compartment, please call our
service department on 01986 784759.
advance electronic display to 30 (rec min setting)
advance electronic display to 35
advance electronic display to 40
advance electronic display to 45
advance electronic display to 50
6
laardness:
rd full to prevent
s:ool