Remove And Install Mower Deck; Removal; Installation - Husqvarna Z400 Series Service Manual

REPAIR

Remove and Install Mower Deck

Removal

1. Park and prepare machine for service. See "Prepare
Equipment for Service" on page 1-13.
2. Raise deck.
3. Loosen mower deck belt tension. See "Adjust Deck
Belt Tension" on page 4-7.
1
Figure 5-12
4. Remove deck belt from power take-off (PTO) pulley
(1).
5. Lower deck.
6. Remove fasteners (2).
HUS1092 3
7. Remove four fasteners (3) and mower deck (4).
8. Clean and inspect mower deck. Repair or replace as
necessary.

Installation

Installation is done in reverse order of removal.
• Adjust deck belt tension. See "Adjust Deck Belt
Tension" on page 4-7.
• Adjust mower deck. See "Adjust Mower Deck" on
page 4-2.
5-6
2
Figure 5-13
4
Figure 5-14
2
HUS1074
3
HUS1067
Z400 Series