Adjust Deck Belt Tension; Z448 - Husqvarna Z400 Series Service Manual

Adjust Deck Belt Tension

Z448

1. Park and prepare machine for service. See "Prepare
Equipment for Service" on page 1-13.
2. Lower deck to minimum height.
1
2
CAUTION
!
Placing too much tension on belt system can
cause the belt bearings to fail prematurely.
3. Attach pull force gauge to eyebolt (1) and pull until
specified force is met.
Specification
48 in Deck Belt Tension
4. Insert pin (2) to hold tensioner in place.
Z400 Series
Figure 4-13
20–23 lb (9.0–10.5 kg)
4-7
ADJUSTMENTS
HUS1149