Activation Of Transmit; Deactivation Of The Transmit Function - Siemens SINUMERIK 840D sl Function Manual

7.2.3

Activation of TRANSMIT

TRANSMIT
After the settings described above have been made, the TRANSMIT function can be
activated:
TRANSMIT or
TRANSMIT (t)
The first declared TRANSMIT function is activated with TRANSMIT. TRANSMIT(t) activates
the t-th declared TRANSMIT function – t may not be greater than 2.
From software version 4 upwards, special procedures for pole transition etc. are also
available with activation in accordance with "Machining Options for TRANSMIT".
Between activation of the function and deactivation as described below, the traversing
movements for the axes of the Cartesian coordinate system can be programmed.
7.2.4

Deactivation of the TRANSMIT function

TRAFOOF
The keyword TRAFOOF deactivates an active transformation. When the transformation is
deactivated, the base coordinate system is again identical to the machine coordinate system.
An active TRANSMIT transformation is likewise deactivated if one of the other
transformations is activated.
(e.g. TRACYL, TRAANG, TRAORI).
References:
/FB3/ Function Manual Special Functions; "3-5 Axis Transformation"(F2).
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Kinematic Transformation (M1)
TRANSMIT
517