Advertisement
Quick Links
Oh'Care Lite Blood Glucose Monitoring System
User Guide - Provided by Vital-e Health
Note: contact a health care professional for advice on how often to measure your blood glucose, and
how to interpret the blood glucose level shown on the Oh'Care Lite blood glucose meter.
Part 1 - Using the Meter
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for OSANG Healthcare Oh’Care Lite
Summary of Contents for OSANG Healthcare Oh’Care Lite
- Page 1 Oh’Care Lite Blood Glucose Monitoring System User Guide - Provided by Vital-e Health Note: contact a health care professional for advice on how often to measure your blood glucose, and how to interpret the blood glucose level shown on the Oh’Care Lite blood glucose meter. Part 1 - Using the Meter...
- Page 2 The Oh’Care Lite kit includes a lancing device, lancets, test strips, and blood glucose meter. Open the battery cover on the back of the meter. Insert the battery with the plus symbol facing up. Close the battery cover.
- Page 3 Open the bottle of Oh’Care Lite test strips. Take out 1 test strip. Close the bottle. Insert the test strip in the slot at the top of the Oh’Care Lite meter, as shown below. Always use genuine Oh’Care test strips with the O’Care Lite meter.
- Page 4 After you insert the test strip, make sure you see code number “125” on the meter corresponding to code number “125” on the bottle.
- Page 5 Press an index finger to the tip of the lancing device. Press the button on the lancing device. The lancet will stick the finger. Squeeze a small drop of blood from the finger.
- Page 6 Wait for the meter to display the blinking blood icon, as shown in the picture below. Touch the tip of the test strip to the drop of blood. Blood will be sucked into the test strip. Do not drip blood onto the test strip.
- Page 7 After a few seconds, the blood glucose number will appear on the meter. The blood glucose level is shown in mg/dL (milligrams per deciliter). The blood glucose level can vary from person to person. For one person it can vary during the day, for many reasons. Contact a health care professional if you have any questions about the blood glucose level.
- Page 8 Oh’Care Lite manufacturer information.
- Page 9 Part 2 - Using the Lancing Device...
- Page 10 Unscrew and remove the lancing device cover. Insert a lancet into the lancing device as shown below.
- Page 11 Grasp and twist the lancet cover to remove it. Put the cover back on the lancing device. Rotate the tip of the lancing device until the desired number 1 2 3 4 or 5 appears in the little window on the side of the lancing device.
- Page 12 You can rotate the tip of the lancing device to the left or right. Numbers 1 2 3 4 5 are displayed in the little window as you rotate the tip. Number 1 indicates the shortest needle length. Number 5 indicates the longest needle length.
- Page 13 Pull out the gray button on the end of the lancing device. Release the button. Press an index finger to the tip of the lancing device. Press the button in the side of the lancing device. The lancet will stick the patient’s finger.
- Page 14 Rotate and remove the tip of the lancing device. Slide the gray button on the side of the lancing device and pull the gray button on the end of the lancing device. The lancet will drop out. Dispose of the lancet properly.
- Page 15 How to interpret messages you may see on the blood glucose meter.
Need help?
Do you have a question about the Oh’Care Lite and is the answer not in the manual?
Questions and answers