Uploading Clips Automatically (Auto Ftp); Uploading Clips Manually (Manual Ftp) - JVC Connected Cam GY-HC550U Instructions Manual

Uploading Clips Automatically (Auto
FTP)
The following are steps to automatically upload
clips recorded in a recording media to a preset FTP
server.
1 Configure the settings for automatic
upload
Configure [Network] B [Upload Settings] B
[Upload] to "Auto" and configure the settings for
each of [Slot], [Cellular] and [Server].
(A P142 [ Upload ] )
.
2 Start uploading
Configuring [Network] B [Upload Settings] B
0
[Auto Upload] to "On" starts uploading.
You can also press the user button that is
0
assigned with "Auto Upload".
Memo :
FTP transfer is performed for the slot configured
0
in [Slot].
If recording is started for the same slot as the
0
one configured in [Slot] while FTP transfer is in
progress, FTP transfer will be interrupted.
FTP transfer is not performed while live
0
streaming or Return over IP is in progress.
FTP transfer is disabled when [System] B
0
[Record Set] B [Record Format] B [System] is
configured to "High-Speed". To perform FTP
transfer, select a setting other than "High-
Speed".

Uploading Clips Manually (Manual FTP)

The following are steps to upload clips recorded in
a recording media to a preset FTP server.
All playable clips on the thumbnail screen can be
uploaded.
1 Configure the FTP server for manual
uploading
Set [Network] B [Upload Settings] B [Upload]
to "Manual".
(A P142 [ Upload ] )
2 Register the [Clip Server].
Open the [Network] B [Upload Settings] B
0
[Clip Server] screen.
Register the server to upload recorded clips
0
in the recording media to.
Up to 4 servers can be registered.
(A P143 [ Clip Server ] )
Memo :
For details on the registered information, please
0
consult the network administrator for the server.
When [Network] B [Upload Settings] B [Upload]
0
is configured to "Auto", manual uploading is also
disabled for slots other than the selected "Slot".
To perform manual uploading, select "Manual".
FTP transfer is disabled when [System] B
0
[Record Set] B [Record Format] B [System] is
configured to "High-Speed". To perform FTP
transfer, select a setting other than "High-
Speed".
Uploading a Video Clip
1 Set the camera recorder to the Media mode.
Press and hold the [MODE] selection button
0
in the Camera mode to enter the Media
mode. A thumbnail screen of the clips
recorded on the recording media is
displayed.
You can upload the selected clips on the
0
thumbnail screen to the FTP server.
(A P97 [Thumbnail Screen] )
Uploading a Recorded Video Clip
183