Advertisement
step 5 bottom cabINet: Turn the cabinet over.
Attach the bottom panel using 11x M6x16mm screws.
step 7: Place top cabinet onto bottom cabinet.
top
cabinet
bottom
cabinet
step 9: Insert 4x shelf supports inside the cabinet at the desired height. Place shelf on shelf supports. Note: the cabinet will only lock when
the shelf is placed in the centre position.
shelf
shelf support
© Jack Sealey limited
bottom
cabinet
m6x35 flange bolt
x4
repeat for the other stackable combination.
Original Language Version
step 6 bottom cabINet: Fit adjustable feet.
m6x16mm
screws
bottom
cabinet
step 8: Connect top and bottom cabinets
using M6x35mm hex flange bolts.
APMSHFP series | Issue 1 21/10/19
Advertisement
