Sealey APMSHFP Series Instruction Manual

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear
instruction protective
manual gloves
1. saFety
WarNINg! ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this storage
‰
system.
locate in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
WarNINg! Use storage on level and solid ground, preferably concrete.
‰
Keep the storage system clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
Do Not use the storage system for any purpose other than that for which it is designed.
8
Do Not use the storage system outdoors.
8
Do Not place the storage system in a damp or wet location or an area where there is condensation.
8
Do Not clean the storage system with any solvents which may damage the surfaces or the protective coating.
8
8 8 Do Not move the storage system when there are items placed inside.
8 8
8 8 Do Not step on the shelves.
8 8
8 8 Do Not8overload the storage system.
8 8
2. INtroDuctIoN
Can be free standing or fixed to the wall. All ten units supplied on a single pallet. Hinged flat pack design makes this storage system easy and
quick to assemble. Base units fitted with stylish black MDF worktops and adjustable feet. Fitted with ball bearing drawer runners and magnetic
door latches. Pegboard design backing panels for additional storage. Extra units available to extend the storage system if required. Some simple
assembly required.
3. specIFIcatIoN
model no: .........................................................apms10HFp
Garage storage system 10pc
overall size: ........................................ 3100 x 460 x 2080mm
Inner drawer dimensions: ........................670 x 398 x 122mm
model no: ...........................................................apms2HFp
modular wall and base cabinet
model no: ........................................................ apms2HFpD
modular wall and base cabinet with drawer
model no: ........................................................ apms2HFps
modular stacking cabinet
© Jack Sealey limited
10pc garage storage system
apmsHFp serIes
model no:
Original Language Version APMSHFP series | Issue 1 21/10/19