Operation; Installing And Removing The Battery Pack - DeWalt DCL074 Instruction Manual

hang inset (Fig. E)
A cord may be used to hang the light by looping it through
the hang inset found on the bottom of the light.
12
screw Threads (Fig. E)
Screw threads, 1/4"-20 7 and 5/8"-11
the bottom of the area light to allow mounting to a tripod.

CAUTION: Use only with D
to ensure stability when mounted.
1. Place the tripod's mounting screw into the appropriate
screw thread on the base of the light and screw the
tripod to the light.
2. Ensure the light is securely attached.
Fig. E
12
Carrying the Area Light (Fig. A)
Carry the area light using one or two of the four side
handles . Never use the side handles to attach the light to
2
anything. Refer to Suspending/Mounting the Area Light.

OPERATION


WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.

Installing and Removing the Battery Pack

(Fig. G)
nOTE: For best results, make sure your battery pack is
fully charged.
1. To install the battery pack
the battery compartment door
pack with the rails inside the battery compartment and
slide it in until the battery pack is firmly seated and
latched. Ensure that it does not disengage, then close
the door.
2. To remove the battery pack from the area light, press
the battery release button
firmly pull the battery pack out.
8 , are provided on
WALT heavy-duty tripod
e
7 8
9 into the area light, open
11 , align the battery
10 on the battery pack and
Fig. G
11
9
10
D WALT Tool Connect™
e
This area light is capable of connecting with mobile
devices that support Bluetooth® Smart (or Bluetooth® 4.0)
technology. (To see if your mobile device is compatible,
visit: http://www.bluetooth.com/Pages/Bluetooth-Smart-
Devices-List.aspx)
D WALT Tool Connect™ is an optional application for your
e
smart device (such as a smart phone or tablet) that can
connect and control your area light.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use
of such marks by D WALT is under license. Other trademarks
e
and trade names are those of their respective owners.
nOTE: The Tool Connect™ App is governed by separate
terms and conditions available for viewing through the
mobile application.
Download the D WALT Tool Connect™ application at:
e
• Follow the instructions in the app to create your Tool
Connect™ account.
• Connect your area light with the D
Connect™ app first by pressing the Tool Connect™
button 3 on the front of the light until it begins to
blink. Then go to the Home screen of the app and select
"+ Tool." The area light can only be connected to one
Tool Connect™ account at a time.
• Once the connection is established, you will be
prompted to give the product an individual name
as well as confirm that you would like to register the
product on your D WALT.com account.
e

CAUTION: When using the scheduler, ensure
the illuminated area is free of personnel before a
scheduled turn off.
For more information on D WALT Tool Connect™
e
functionality and features, please call 1–800–4-D
(1–800–433–9258), visit www.D
the FAQ page and help screens located inside the
mobile application.
English
WALT Tool
e
WALT
e
WALT.com or view
e
7