Connector And Cabling; Pci-Fbus/2; Fieldbus Cable Connector Pinout - National Instruments FOUNDATION NI-FBUS Hardware And Software User Manual

Connector and Cabling

PCI-FBUS/2

Fieldbus Cable Connector Pinout

© National Instruments Corporation
This chapter provides hardware connector and interface cabling
information for PCI-FBUS, PCMCIA-FBUS, USB-8486, and
FBUS-HSE/H1 linking devices.
This section contains information about the pinout of the PCI-FBUS
connectors.
To make a Fieldbus cable, ensure that pins 6 and 7 are used for the Fieldbus
signals as shown in Figure 3-1. The cable must also follow the technical
specifications listed in the document Fieldbus Standard for Use in
Industrial Control Systems, Part 2, ISA-S50.02.1992. Refer to Figure 3-1
for the connector pinout of the PCI-FBUS.
No Connection
No Connection
No Connection
No Connection
No Connection
Figure 3-1. Fieldbus Connector Pinout for the PCI-FBUS
3-1 NI-FBUS Hardware and Software User Manual
3
No Connection
No Connection
Data –
Data +