Yamaha ACU16-C Owner's Manual page 21

Windows XP
1 Start your computer and Windows, and insert the included CD-ROM into
your computer's CD-ROM drive.
2 Click the Start button, and then click Control Panel.
If the Control Panel window appears as shown below, click "Switch to Classic View" on the
left side of the window in order to see all the control panels.
Go to System Hardware–>Driver signatures–>Driver signature options,
3
select "Ignore—Install software without asking for confirmation," and then
click OK.
Click OK to close the System Properties window, and then click the Close but-
4
ton to close the Control Panel window.
Turn off the ACU16-C/NHB32-C and use a USB cable to connect the USB port
5
on the ACU16-C/NHB32-C to a USB port on your computer.
Turn on the ACU16-C/NHB32-C.
6
The Found New Hardware Wizard appears.
Select "Install software automatically (recommended) (I)," and then click
7
Next.
The driver is installed, and the message "Completing the Found New Hardware Wizard"
appears.
Click Finish, and then restart your computer.
8
Installing the USB MIDI Driver
ACU16-C & NHB32-C Owner's Manual
17