Yamaha ACU16-C Owner's Manual page 19

Windows Me
1 Start your computer and Windows, and insert the included CD-ROM into
your computer's CD-ROM drive.
2 Turn off the ACU16-C/NHB32-C and use a USB cable to connect the USB port
on the ACU16-C/NHB32-C to a USB port on your computer.
Turn on the ACU16-C/NHB32-C.
3
The Add New Hardware Wizard appears. If it doesn't appear, try disconnecting and recon-
necting the USB cable. Alternatively, open the Add New Hardware control panel.
Select "Automatic search for a better driver (Recommended)," and then click
4
Next.
Windows Me should be able to locate the driver automatically, in which case you can pro-
ceed to Step 5. If the driver cannot be located, select "Specify the location of the driver
(Advanced)," click Next, specify your CD-ROM drive (e.g., D:\USBdrv_), and then con-
tinue as prompted.
The following window appears when the installation is complete.
Click Finish, and then restart your computer.
5
Installing the USB MIDI Driver
ACU16-C & NHB32-C Owner's Manual
15