Advertisement
Quick Links
Advertisement
Related Manuals for National Instruments PXI-8461/2
Summary of Contents for National Instruments PXI-8461/2
- Page 1 (217) 352-9330 | Click HERE Find the National Instruments PXI-8461/2 at our website:...
-
Page 2: Software For Windows
The NI-DNET software on this CD supports Microsoft Windows operating systems. This installation guide covers all National Instruments hardware products for DeviceNet on the PCI, PCMCIA, and PXI buses. It is written for users already familiar with Windows. - Page 3 Install the NI-DNET Software Before the Hardware Before installing the NI-DNET software, first log on as or as a Administrator user with Administrator privileges. The NI-DNET setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps.
- Page 4 6. Screw the mounting bracket of the CAN card to the back panel rail of the computer. 7. Replace the top cover (or the access panel to the expansion slot). 8. Proceed to the Verify Your Installation section. © National Instruments Corporation NI-DNET Hardware and Software for Windows...
- Page 5 Install Your PCMCIA-CAN Card Before you remove the card from the package, touch the Caution antistatic plastic package to a metal part of your system chassis to discharge electrostatic energy, which can damage components on your CAN card. 1. Insert the card into a free PC Card (PCMCIA) socket. 2.
-
Page 6: Connect The Cables
After you have installed the CAN interface, connect your CAN cables to the interface. Because exact cabling requirements vary for each application, National Instruments does not provide cables, other than the PCMCIA-CAN cable. Refer to Appendix B, Cabling Requirements, of the NI-DNET User Manual for information about the cabling requirements of the CAN hardware. - Page 7 1. Select Start Setting Control Panel Add or Remove Programs. 2. Select National Instruments Software. Click the Change/Remove button. 3. Select NI-DNET in the list of products and click Remove. For Windows Vista, complete the following steps to uninstall the NI-DNET software.
-
Page 8: Further Documentation
NI-DNET software and hardware. Refer to the NI-DNET Programmer files on the CD or Reference Manual.pdf NI-DNET User Manual.pdf in the folder on your hard drive. NI-DNET\Documentation © National Instruments Corporation NI-DNET Hardware and Software for Windows... - Page 9 National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents .
Need help?
Do you have a question about the PXI-8461/2 and is the answer not in the manual?
Questions and answers