Nintendo Switch Setup; G935 / G635 Customize Surround Sound With Logitech G Hub; Enable And Disable Surround Sound; G935 Operation Modes - Logitech G935 Faq

Nintendo Switch Setup

1. Set Switch to Wireless On position
2. Connect the USB Wireless Adapter into the USB port inside the Switch TV Dock
3. Audio output will change to your headset automatically

G935 / G635 Customize Surround Sound With Logitech G HUB

You can use Logitech G HUB to customize surround sound settings on the G635 and G935 gaming
headsets.
NOTE: Make sure you're using the latest version of G HUB before you connect your gaming headset to
the PC.
You can download the latest version of G HUB from your gaming headset's support

Enable and Disable Surround Sound

The G635 and G935 gaming headsets can have surround sound mode enabled or disabled by following
one of two methods:
1. G2 G-key — Press the G2 G-key to cycle between stereo and surround sound modes on the gaming
headset.
NOTE: The default Surround sound on/off command assignment for the G2 G-key can assigned to
another G-key if desired.
2. G HUB Surround Sound Mixer On/Off — Click the check box for the Enable Surround Sound option in
the G HUB Acoustics window to enable or disable surround sound on the gaming headset.
Room Name
You can choose from the following three Room Name options:
- DTS Entertainment
- DTS Gaming
- DTS Sports
DTS Super Stereo Mode
You can choose from the following two Super Stereo Modes:
- Front
- Wide
- Traditional
Audio Channel Volume Settings
Click the up or down arrows to adjust the volume level for each audio channel in the 7.1 surround sound
configuration. The incremental adjustments range from 0 to 11.

G935 Operation Modes

The G935 gaming headset has two operation modes, Wireless On, and Wireless Off.
These modes affect the operational capabilities of the G935 when connected to different compatible
devices.
Download page.