Client Computer Connection - Meyer Sound Galileo GALAXY 408 User Manual

CHAPTER 2: GALAXY ENCLOSURES AND I/O

CLIENT COMPUTER CONNECTION

The GALAXY's RJ-45 port connects to a standard computer Ethernet port with Gigabit-capable (CAT5e or better) network
cables. A Mac or Windows-based computer running Compass Control Software uses an Ethernet connection to control the
unit remotely. Bi-directional communication between the GALAXY processor and Compass allows the user to change
settings on either device and stay in sync.
To establish a connection between a single GALAXY processor and a computer, do the following:
1. Locate the USB drive delivered with the GALAXY processor. The drive contains the version of Compass that matches
the version of firmware installed in the GALAXY processor. Or, download the latest version of Compass Control Software
from the Meyer Sound website:
https://meyersound.com/product/compass/#software
There is a registration procedure for first-time web site users.
2. Install the Compass Control Software on a Mac or Windows-based computer.
3. Connect both the GALAXY processor and the Computer with Compass Control Software installed to the network switch.
RJ-45 connectors
Figure 10: GALAXY Processor and Computer Connected to a Network Switch
4. Apply power to the GALAXY processor by connecting the powerCON first, then the other end of the electrical cable.
26
AES/EBU OUTPUT
AES/ANALOG INPUT
ANALOG OUTPUT
Computer with Compass Control Software
GALAXY