Yamaha CC-70W Owner's Manual page 30

TAPE DECK OPERATION (for KXW-S70 Double Cassette Deck)
Tape Deck
1 2 4
1
1
6
6
A
TIME PROG
SEARCH
DISC SKIP RANDOM REPEAT
PRESET
DOWN
4
PLAY STOP
REC/PAUSE
POWER SLEEP
Dolby B and C Type Noise Reduction
With cassette tapes, the most noticeable form of noise is high
frequency hiss. To reduce this hiss noise, this unit has been
equipped with a newly developed Dolby C noise reduction
system in addition to its conventional Dolby B NR. Either type
of noise reduction may be selected with the switch provided.
Dolby B NR has a noise reduction effect of about 10 dB in
the high frequency range. The corresponding figure with
Dolby C NR is about 20 dB, but this is over the entire range
where the human ear is most sensitive to noise (2 kHz to 8
kHz). Also, Dolby C NR has the same noise reduction effect
at both high and low signal levels. In addition, Dolby C NR
improves the tape's MOL (Maximum Output Level).
Dolby noise reduction is a 2 part process that acts both on
recording and playback; be sure that the noise reduction
button is set to the same position on record and play.
* Noise in the source material cannot be reduced with the
Dolby NR system.
3
4 1
TUNER DIRECT
2 3 4 5
2 3 4 5
7 8
7 8 9 0
B C D E
+
TAPE EDIT I0
4
STOP PLAY/PAUSE
SKIP
3
CD
A/B/C/D/E
UP
TUNER
PLAY
TAPE
DECK PHONO/AUX
A/B
DISPLAY VOLUME
+
-
Continuous playback
1
Load the tapes into the DECK A and DECK B cassette
compartments.
2
Set the reverse mode switch to
The reverse mode switch can be operated before or during
playback, and changes tape playback as follows:
< >
Tape A
< >
Tape A
3
Press the DECK A or B select button to select the tape to
be played back first.
4
Press the play
play button for side B.
DOLBY B.C NR •
Dolby and the double D mark are trademarks of Dolby
Laboratories Licensing Corp. Dolby noise reduction
system manufactured under license from Dolby
Laboratories Licensing Corp.
28
.
Tape A Side A B Tape B Side A
Continuous play (8 times)
Tape A Side B Tape B Side A
Tape A Side A
Continuous play (8 times)
button to listen to side A, or the
B
B