Service - JobSmart 3951103 Assembly & Operating Instructions

Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause
accidents or injury.
Do not operate the
liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.
Keep bystanders, children and visitors away while operating the
cause you to lose control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and
safer at the rate for which it is designed.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users.
Always check to make sure that the power switch is turned off before connecting blaster to power
source. Tool may cause damage to property or person if plugged in while power switch is on.
All work areas should be clean and well lit. Accidents can occur in poorly lit and cluttered areas.
Keep children, and other distractions at a distance while operating the Blast Cabinet.
Use common sense while operating this abrasive blast cabinet.
Do not use this tool if you are:
Feeling tired or are under the influence of alcohol or drugs.
•
Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
•
Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
•
When using this blast cabinet, always:
•
Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
•
Check that the power switch is in the "OFF" position before plugging the unit into an electrical outlet.
•
Use the correct tool for the job. Using the correct tool is safer and faster.
Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.
Check to be sure all moving parts are free from binding and are properly aligned.
Use only accessories that are recommended by the manufacturer for your tool model.
Safety glasses and ear protection must be worn during operation.

SERVICE

Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified
personnel could result in a risk of injury.
3951103 JobSmart Abrasive Blast Cabinet Assembly & Operating Instructions
abrasive blaster
in explosive areas, such as in the presence of flammable
abrasive blaster. Distractions can
4