Advertisement
Installation Guide
Installing the PI in a 19-Inch Cabinet
1
Insert the PI into a slot on the auxiliary mounting bracket and tighten the
captive screws on the mounting ears.
Fix the floating nuts.
2
NOTE
When you fix the floating nuts, allow a heat dissipation space of at
least 25 mm above and below the PI.
Floating nut
Mounting hole
3
Install the chassis in the cabinet.
M6
2.0±0.2 N· M
26/27 >>
4
Install the PGND cable.
Attach the PGND cable to a
ground point on a cabinet column
or to an indoor ground bar.
Install the PGND cable with the ground screw (M4).
Installing the PI in an ETSI Cabinet
1
Insert the PI into a slot on the auxiliary mounting
bracket and tighten the captive screws on the
mounting ears.
Install the PGND cable.
3
Attach the PGND cable to a ground point
on a cabinet column or to an indoor
ground bar.
Install the PGND
cable with the ground
screw (M4).
4
Install the mounting ears.
NOTE
Before installing the chassis in an ETSI cabinet, adjust the
holes for installing mounting ears based on the cabinet type.
Mounting
M6
ears
3.0±0.3 N· M
Fix the floating nuts.
2
NOTE
When you fix the floating nuts, allow a heat dissipation
space of at least 25 mm above and below the PI.
Floating nut
Mounting hole
M4
1.4±0.14 N· M
5
Install the chassis in the cabinet.
M6
2.0±0.2 N· M
06
Advertisement
