Siemens SICAM Q100 System Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Measuring Instruments
  5. SICAM Q100
  6. System manual
Siemens SICAM Q100 System Manual

Siemens SICAM Q100 System Manual

Class a power quality instrument and power monitoring device
Hide thumbs Also See for SICAM Q100:
Table of Contents

Advertisement

Quick Links

Class A Power Quality
Instrument and
Power Monitoring Device
SICAM Q100
7KG95xx
V2.30
System Manual
E50417-C1040-C522-A8
Preface
Open Source Software
Contents
User Information
Communication
Connection with SICAM PQS
Glossary
Index
1
2
3

Advertisement

Table of Contents
loading

Related Manuals for Siemens SICAM Q100

Summary of Contents for Siemens SICAM Q100

  • Page 1 Preface Open Source Software Class A Power Quality Contents Instrument and Power Monitoring Device User Information SICAM Q100 Communication 7KG95xx Connection with SICAM PQS V2.30 Glossary System Manual Index E50417-C1040-C522-A8...
  • Page 2 Edition 09.2020 SIPROTEC, DIGSI, SIGRA, SIGUARD, SAFIR, SICAM, and Product version: V2.30 MindSphere are trademarks of Siemens. Any unauthorized use is prohibited. All other designations in this document may represent trademarks whose use by third parties for their own purposes may...

  • Page 3: Preface

    This manual is intended for project engineers, commissioning and operating personnel in electrical systems and power plants. Scope of Validity of this Manual This manual is valid for the Class A Power Quality Instrument and Power Monitoring Device SICAM Q100 7KG95xx. Further Support For any questions concerning your system, please contact your Siemens representative.
  • Page 4 Follow all advice instructions to prevent damage to property. NOTE NOTE is important information about the product, the handling of the product, or the part of the documentation in question to which special attention must be paid. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 5: Open Source Software

    The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source Software License Conditions provide for it you can order the source code of the Open Source Software from your Siemens sales contact - against payment of the shipping and handling charges - for a period of at least 3 years since purchase of the Product.
  • Page 6 SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 7: Table Of Contents

    Downloading the IID File from SICAM Q100 ........
  • Page 8 Index................. . 123 SICAM Q100, 7KG95xx, System Manual...

  • Page 9: User Information

    User Information General User Information Contents of this System Manual SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 10: General User Information

    Connection to SICAM PQS SICAM PQS enables fault records and power quality data generated by SICAM Q100 to be analyzed. The COMTRADE data format is supported by the fault recorder and PQDIF by the trend recorder and measurement recorder. The IEC 61850 protocol is used for communication.

  • Page 11: Communication

    Communication Communication Interfaces Modbus Modbus RTU Master Modbus TCP to Modbus RTU Gateway Communication Protocol IEC 61850 Server Application Examples for Communication with Subdevices SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 12: Communication Interfaces

    Communication 2.1 Communication Interfaces Communication Interfaces The communication interfaces of SICAM Q100 make 4 communication types possible using the corresponding communication protocols: • Modbus TCP Server via Ethernet interface • Modbus RTU Master and Modbus RTU Slave via RS485 interface •...
  • Page 13 IP network configuration. The customer-specific IP configuration is not overwritten. The network configuration settings can be displayed and edited via HTML pages or via the device display (see Device Manual SICAM Q100 7KG95xx, order number E50417-H1040-C522). After a renewed restart the pa- rameterized network configuration is used again.
  • Page 14 Having received the network configuration, the device launch- es the Ethernet services. If no DHCP server is available, disconnect the device from the network and start it using the default IP address and subsequently assign a permanent IP address. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 15 Communication 2.1 Communication Interfaces 2.1.1.3 Ethernet Interface Description SICAM Q100 is equipped with an Ethernet interface. The data are exchanged via the RJ45 Ethernet plug con- nector located on the top side of the device. Ethernet connector RJ45 Figure 2-3...

  • Page 16: Communication Via Rs485 Interface

    Maximum 0x/1x register gap • Maximum 3x/4x register gap You can modify these parameters during the parameterization, see Device Manual SICAM Q100, chapters 8 and 9. Data of the RS485 Interface when Using the Modbus RTU Slave The RS485 interface comes with the following parameters set by the manufacturer: •...
  • Page 17 The RS485 interface is located on the terminal side. D-sub connector plug Figure 2-4 D-Sub Connector Plug of SICAM Q100 NOTE The pinout of the D-sub connector plug is described in Device Manual SICAM Q100, chapter 13. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 18: Modbus

    The messages contain the following codes: Exception Code 01 ILLEGAL_FUNCTION • The Modbus client uses a function that is not supported by the Modbus server of the SICAM Q100. The supported Modbus functions are listed in chapter . Exception Code 02 ILLEGAL_DATA_ADDRESS •...

  • Page 19: Properties And Parameterization Of The Modbus Tcp Server

    253 bytes max. for data and  7 bytes for the Modbus TCP header Parameterization The following parameters can be set for the Modbus TCP bus protocol (see also Device Manual SICAM Q100, chapter 8): Table 2-2 Modbus TCP Settings...

  • Page 20: Modbus Rtu Slave

    With user-defined port 1: 2 connections via the standard pot 502 and 2 connections via the configured port number • With user-defined port 2: 1 connection via the configured port number 2.2.4 Modbus RTU Slave SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 21: Numbering Of Modbus Registers

    100 ms to 6 553 400 ms 2.2.5 Numbering of Modbus Registers 2.2.5.1 Modbus Specifications Generally, we have to differentiate between the following elements in Modbus: • the register number • the register address in Modbus messages SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 22: Data Types

    The Modbus bus mapping documents for the individual SICAM devices use the register number to reference a piece of information in the Modbus register set. Only holding registers are used for SICAM Q100. All measured values, indications, metered values etc. are stored in these holding registers.
  • Page 23 (<exponent> - 127) 0 < Exponent < 255: Resulting value = (-1) * 1, <mantissa> Status and Quality Information SICAM Q100 uses floating-point numbers with the exponent 255 (Inf, NaN) to display status information of the measured values: Table 2-4 Floating-point Numbers...
  • Page 24 Communication 2.2 Modbus SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 25 Date/Time Status 10H set: Daylight saving time active 20H set: Date/time error: equivalent to FAIL bit, see Device Manual SICAM Q100, Time Synchronization. NOTE For the time synchronization via Ethernet, Siemens recommends the use of NTP. SICAM Q100, 7KG95xx, System Manual...
  • Page 26 2.2.6.4 Data Type - Controllable Indications (Read and Write) The Controllable Indications data type is needed for: • The binary outputs of the SICAM Q100 • Processing internal device commands (for example resetting the energy counters). The holding register is used for read and write access in this context.
  • Page 27 Counter data type is structured as follows: Counter (31 Bit) Byte 3 (MSB) Byte 2 Byte 1 Byte 0 (LSB) Holding register 08xx Holding register 08xx+1 Bit S (Sign) Reserved for negative metered values SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 28: Data In The Modbus Registers (Data Mapping)

    Register 0151: Load profiles (write only) • Register 0152: Load profiles (read only) • Register 0153: Synchronization of load profile measuring period (read and write) • Register 0154: Tariffs (read and write) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 29 Prevailing ratio of harmonics: current values (read only) • Register 12001 to 12378: Phase angle of harmonic power (read only) • Register 13001 to 13378: Harmonic power - active power value (read only) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 30 Each of these telegrams contains the register range entered for these values (or a part of it) for phases a, b, and c. In SICAM PQS, the user must define different corresponding requesting groups for this, for example: Figure 2-5 Settings in SICAM PQS SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 31 The time synchronization only takes effect when the time has been completely transmitted. Data type: Date/time Table 2-6 Registers 0065 to 0068: Date and Time Register Type of Information Remark 0065 Milliseconds see chapter 2.2.6.2 0066 Hours/minutes 0067 Month/day 0068 Time status/year SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 32 1 = Parameter check is in progress 0101/2 Settings Activate 1 = Parameter activation is in progress 0101/2 Reserved 0102/2 Direction of rotation 0 = Anti-clockwise 1 = Clockwise 0102/2 Reserved 0102/2 SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 33 Limit Violation 1 An indication is output (= 1) if a measured value has exceed- ed or fallen below a configured limiting value. For more infor- mation, see the SICAM Q100 device manual, chapter 8. 0111/2 Limit Violation 2 0111/2...
  • Page 34 If a voltage, frequency or voltage unbalance event happened and ended, the relevant bit of this register will be set to "1" and will be kept until it is reset by using relevant bits in register 141. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 35 2.2.7.10 Register 0135 and 0137: Status of Binary Inputs (BI) of SICAM IO Subdevice (Read Only) This register is write-protected. A write attempt will be rejected with exception code 02 (ILLEGAL_DATA_ADDRESS). Data type: Indication SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 36 Binary input 2-P SICAM IO 1, terminals P9/10 0135/2 Binary input 3-P SICAM IO 1, terminals P11/12 0135/2 Reserved 0135/2 SICAM Subdevice 1 OK Communication with the SICAM IO 7XV5673 is: 0 = interrupted 1 = established SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 37 N5/6 0136/2 Binary output 1-P SICAM IO 1, terminals P1/2 0136/2 Binary output 2-P SICAM IO 1, terminals P3/4 0136/2 Binary output 3-P SICAM IO 1, terminals P5/6 0136/2 Reserved 0136/2 Reserved SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 38 Indication 9 from Remote 0142/2 Indication 10 from Remote 0143/2 Indication 11 from Remote 0143/2 Indication 12 from Remote 0143/2 Indication 13 from Remote 0143/2 Indication 14 from Remote 0143/2 Reserved 0150/2 SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 39 0152/2 Load Profile Period Closed Indication for closing a subperiod/measuring period 0152/2 Reserved 0152/2 SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 40 Registers 0201 to 0390, and 6401 to 6484: Measured Values Register Type of Information Remark Unit 0201 Voltage a-N 0203 Voltage b-N 0205 Voltage c-N 0207 Voltage neutral conductor 0209 Current a 0211 Current b 0213 Current c SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 41 Active power factor b cos (c) 0255 Active power factor c cos  0257 Active power factor 0259 Power factor a 0261 Power factor b 0263 Power factor c 0265 Power factor SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 42 ° (degree) 0315 Reactive power (A)_Fundamental 0317 Reactive power (B)_Fundamental 0319 Reactive power (C)_Fundamental 0321 Reactive power ()_Fundamental 0323 to 0358 Flicker see chapter 2.2.7.18 0359 to 0382 0383 Zero seq. comp. V SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 43 Current c THDI 6437 THDI (Vab) Voltage ab THDI 6439 THDI (Vbc) Voltage bc THDI 6441 THDI (Vca) Voltage ca THDI 6443 THD2650 (Va) Voltage a THD2650 6445 THD2650 (Vb) Voltage b THD2650 SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 44 Voltage ab K-Factor 6475 K-Factor (Vbc) Voltage bc K-Factor 6477 K-Factor (Vca) Voltage ca K-Factor 6479 TDD (Ia) Current a TDD 6481 TDD (Ib) Current b TDD 6483 TDD (Ic) Current c TDD SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 45 It depends on the connection type (ph-ph or ph-n) which measured values are available. Phase-to-phase quantities are available in 3-wire networks; phase-to-ground quantities are available with all other connection types. See SICAM Q100 Device Manual, chapter 4, section “Measurands Depending on the Connection Type”.
  • Page 46 Data type: Data/time Table 2-24 Registers 0396 to 0399: Data/Time for Last Period PQ Calculation for Frequency Register Type of Information Remark 0396 Milliseconds see chapter 2.2.6.2 0397 Hours/minutes 0398 Month/day 0399 Time status/year SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 47 PQ_Pb Active power b 0431 PQ_Pc Active power c 0433 PQ_P Active power 0435 PQ_Qa Reactive power a 0437 PQ_Qb Reactive power b 0439 PQ_Qc Reactive power c 0441 PQ_Q Reactive Power SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 48 Zero seq. comp. I 0485 PQ_Freq_10s Frequency The period for calculating the power frequency is 10 s. 0487 PQ_THDS (Va) Voltage a THDS 0489 PQ_THDS (Vb) Voltage b THDS 0491 PQ_THDS (Vc) Voltage c THDS SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 49 0777 PQ_Voltage (23) Angle Vb-Vc ° (degree) 0783 PQ_Current (23) Angle Ib-Ic ° (degree) 16001 PQ_THDS (Vab) Voltage ab THDS 16003 PQ_THDS (Vbc) Voltage bc THDS 16005 PQ_THDS (Vca) Voltage ca THDS SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 50 PQ_Pb_min Active power b 0561 PQ_Pc_min Active power c 0563 PQ_P_min Active power 0565 PQ_Qa_min Reactive power a 0567 PQ_Qb_min Reactive power b 0569 PQ_Qc_min Reactive power c 0571 PQ_Q_min Reactive power SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 51 Zero seq. comp. I 0615 PQ_Freq_10s_min Frequency The period for calculating the power frequency is 10 s. 0617 PQ_THDS (Va)_min Voltage a THDS 0619 PQ_THDS (Vb)_min Voltage b THDS 0621 PQ_THDS (Vc)_min Voltage c THDS SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 52 0779 PQ_Voltage Angle Vb-Vc ° (degree) (23)_min 0785 PQ_Current Angle Ib-Ic ° (degree) (23)_min 16007 PQ_THDS (Vab)_min Voltage ab THDS 16009 PQ_THDS (Vbc)_min Voltage bc THDS 16011 PQ_THDS (Vca)_min Voltage ca THDS SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 53 PQ_Pb_max Active power b 0681 PQ_Pc_max Active power c 0683 PQ_P_max Active power 0685 PQ_Qa_max Reactive power a 0687 PQ_Qb_max Reactive power b 0689 PQ_Qc_max Reactive power c 0691 PQ_Q_max Reactive power SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 54 Zero seq. comp. I 0735 PQ_Freq_10s_max Frequency The period for calculating the power frequency is 10 s. 0737 PQ_THDS (Va)_max Voltage a THDS 0739 PQ_THDS (Vb)_max Voltage b THDS 0741 PQ_THDS (Vc)_max Voltage c THDS SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 55 0781 PQ_Voltage Angle Vb-Vc ° (degree) (23)_max 0787 PQ_Current Angle Ib-Ic ° (degree) (23)_max 16013 PQ_THDS Voltage ab THDS (Vab)_max 16015 PQ_THDS Voltage bc THDS (Vbc)_max 16017 PQ_THDS Voltage ca THDS (Vca)_max SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 56 Status of counters WQb_ind 0804/2 Energy_Counters_Status_11 Status of counters WQc_ind 0804/2 Energy_Counters_Status_12 Status of counters WQ_ind 0804/2 Energy_Counters_Status_13 Status of counters WQa_cap 0804/2 Energy_Counters_Status_14 Status of counters WQb_cap 0804/2 Energy_Counters_Status_15 Status of counters WQc_cap SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 57 Reactive Energy, Inductive, Phase B Pulse 0827 WQc_ind Reactive Energy, Inductive, Phase C Pulse 0829 WQ_ind Reactive Energy, Inductive Pulse 0831 WQa_cap Reactive Energy, Capacitive, Phase A Pulse 0833 WQb_cap Reactive Energy, Capacitive, Phase B Pulse SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 58 Registers 0985 to 0988: User Specified Frequency for Mains Signalling Voltage Evaluation Register Type of Information Remark Unit 0985 MS_Freq1 User-specified frequency 1 for mains signal- ling voltage evaluation 0987 MS_Freq2 User-specified frequency 2 for mains signal- ling voltage evaluation SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 59 (x = 2 to 63) (2 bytes for each register) 1505 H_Ib-1 Harmonic, current value, b (fundamental) 1507 to H_Ib-x Harmonic,current value, b 1630 (x = 2 to 63) (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 60 (2 bytes for each register) 2001 H_Vc/Vca-1_AVG Harmonic (average value), voltage value, c-N, ca (Fundamental) 2003 to H_Vc/Vca-x_AVG Harmonic (average value), voltage value, c-N, ca 2098 (x = 2 to 49) (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 61 Harmonic (average value), current value, a (Fundamental) 2603 to H_Ia-x_AVG Harmonic (average value), current value, a 2698 (x = 2 to 49) (2 bytes for each register) 2701 H_Ib-1_AVG Harmonic (average value), current value, b (Fundamental) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 62 Status of counters WQ_cap_imp_tariff_1 2903/2 Tariff_Counters_Status_7 Status of counters WQ_ind_tariff_1 2903/2 Tariff_Counters_Status_8 Status of counters WQ_cap_tariff_1 2904/2 Tariff_Counters_Status_9 Status of counters WS_tariff_1 2907/2 Reserved 2907/2 Reserved 2907/2 Reserved 2907/2 Reserved 2908 Reserved SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 63 (2 bytes for each register) 3101 H_Ib-1_MAX Harmonic (average value), current value, b (Fundamental) 3103 to H_Ib-x_MAX Harmonic (average value), current value, b 3198 (x = 2 to 49) (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 64 3429 WQ_ind_tariff_value_1 Reactive Energy, Inductive, Tariff 1 varh 3433 WQ_cap_tariff_value_1 Reactive Energy, Capacitive, Tariff 1 varh 3437 WQ_imp_tariff_value_1 Reactive Energy, Import, Tariff 1 varh 3441 WQ_exp_tariff_value_1 Reactive Energy, Export, Tariff 1 varh SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 65 2.2.7.34 Registers 4379 to 4756: Phase Angle of Harmonics - Current Values (Read Only) These registers are write-protected. A write attempt will be rejected with exception code 02 (ILLEGAL_DATA_ADDRESS). Calculation period: 10/12 cycle (50Hz/60Hz) Network types: Only 1P2W, 3P4W_bal, 3P4W_unb_PN is available. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 66 5009 Influenced phase Related phases bit 0: Va, bit 1: Vb, bit 2: Vc, bit 3: Vab, bit 4: Vbc, bit 5: Vca if any bit =1 means corresponding phase is influenced SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 67 Registers 5401 to 5409: The Latest Voltage Interrupt Register Type of Information Unit Remark 5401 Milliseconds Start time of interrupt Data format see chapter 2.2.6.2 5402 Hours/minutes 5403 Month/day 5404 Time status/year SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 68 5511 Influenced Phase Related phases bit 0: Va, bit 1: Vb, bit 2: Vc, bit 3: Vab, bit 4: Vbc, bit 5: Vca if any bit =1 means corresponding phase is influenced SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 69 Total number of PQ voltage-unbalanced events 6027 Volunb_Event_Lnumber Number of PQ voltage-unbalanced events since last polling 6029 Freq_Event_Number Total number of PQ frequency events 6031 Freq_Event_Lnumber Number of PQ frequency events since last polling SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 70 LOADPROFILE_TEMP_SYNCED 0x00000100 The flag is set if the period was synchronized internally; the external synchronization (binary inputs, communica- tion) has not been received yet. LOADPROFILE_FLAG_QN 0x00000080 Reactive Power = Qn SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 71 Cumulated reactive power export (previous period) 6123 Cumulated apparent power (previous period) 6125 Maximum active power (previous period) 6127 Minimum active power (previous period) 6129 Maximum reactive power (previous period) 6131 Minimum reactive power (previous period) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 72 Registers 6485 to 6498: Frequency and Voltage Deviation Register Type of Information Unit 6485 Va deviation 6487 Vb deviation 6489 Vc deviation 6491 Vab deviation 6493 Vbc deviation 6495 Vca deviation 6497 Frequency deviation SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 73 ° (degree) Harmonic (prev. phase angle), voltage value, c-N (fundamental) 7255 to HPP_Vc-x ° (degree) Harmonic (prev. phase angle), voltage value, c-N 7378 (x = 2 to 63) (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 74 (2 bytes for each register) 8061 to 8080 MV x from device 3 Measured values 1 to 15 from Modbus (x = 1 to 15) slave device 3 (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 75 (2 bytes for each register) 8211 to 8240 MV x from device 8 Measured values 1 to 15 from Modbus (x = 1 to 15) slave device 8 (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 76 10003 to HPR_Va-x ° (degree) Harmonic (prevailing ratio), voltage value, a-N 10126 (x = 2 to 63) (2 bytes for each register) 10127 HPR_Vb-1 ° (degree) Harmonic (prevailing ratio), voltage value, b-N (fundamental) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 77 HPR_Ic-1 ° (degree) Harmonic (prevailing ratio), current value, c (fundamental) 10633 to HPR_Ic-x ° (degree) Harmonic (prevailing ratio), current value, c 10756 (x = 2 to 63) (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 78 Type of Information Remark Unit 13001 HP_Pa-1 ° (degree) Harmonic (active power), a-N (fundamental) 13003 to HP_Pa-x ° (degree) Harmonic (active power), a-N 13126 (x = 2 to 63) (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 79 (2 bytes for each register) 14253 HP_Qc-1 ° (degree) Harmonic (reactive power), c-N (fundamental) 14255 to HP_Qc-x ° (degree) Harmonic (reactive power), c-N 14378 (x = 2 to 63) (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 80 (2 bytes for each register) 15253 HP_Sc-1 ° (degree) Harmonic (apparent power), c-N (fundamental) 15255 to HP_Sc-x ° (degree) Harmonic (apparent power), c-N 15378 (x = 2 to 63) (2 bytes for each register) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 81 1 = 0: Auxiliary power works well. bit 2 = 1: Device starts up. bit 2 = 0: Device works well. bit 3 = 1: Time jumps. bit 3 = 0: Time does not jump. 23016 Reserved SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 82 I positive sequence 30019 I negative sequence 30021 I zero sequence 30023 Uab RMS 30025 Ubc RMS 30027 Uca RMS 30029 Start of sample period (number of milliseconds since 1970-01-01 00:00 UTC) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 83: Modbus Diagnosis

    Modbus Diagnosis The diagnostics for Modbus TCP and Modbus RTU Slave allows analyzing the parameters and communication as well as resetting the diagnostics counters. For more information, see the SICAM Q100 device manual, chap- ter 8, Configuration of the Device.
  • Page 84 Device address: Default setting: 1 • Baud rate: Default setting: 19 200 bit/s • Parity: Default setting: Even • Access rights: Default setting: Full • Communication supervision time: Default setting: 60 000 ms SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 85 Access rights violations: Total number of write accesses received if the parameter Access rights is set to Read only in the Communication serial input/ output window (see Device Manual, chapter Operation - Serial Communication) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 86: Modbus Rtu Master

    Supported Modbus Register Sets • Coil status registers (0x references, read only) • Input status registers (1x references, read only) • Input registers (3x references, read only) • Holding registers (4x references, read only) SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 87 Modbus master in SICAM Q100. The data of all devices with the same address are then queried by a Modbus slave device.

  • Page 88: Modbus Rtu Master Diagnosis

    Maximum 3x/4x register gap NOTE The parameterization of the serial communication via the RS485 interface, the Modbus slave devices, and the associated mapping are described in detail in the SICAM Q100 device manual, chapters 8.3.7.3 and 8.3.7.4. 2.3.2 Modbus RTU Master Diagnosis The diagnosis for Modbus RTU master and Modbus gateway allows: •...
  • Page 89 Not requested: the request was not sent yet after changing the configuration  No response: the Modbus slave device does not respond (for example, communication failure)  Exception responses (n): exception respons essent with error code SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 90 • Bad messages: Counter for errors of this request:  No responses  Exception responses  CRC errors SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 91 If a Modbus slave device is connected correctly, the serial parameters (baud rate and parity) are identical to the parameterization in the Modbus master of SICAM Q100, the device address was checked, and the errors "no responses" and/or "CRC errors" still occur (sporadically), proceed as follows: •...

  • Page 92: Modbus Tcp To Modbus Rtu Gateway

    Device type: SICAM Q100 Q100 2 Device name: Q100 1 Gateway RS485: Modbus Master Modbus RTU RS485: Modbus Slave RS485: Modbus Slave Figure 2-10 Functioning of Modbus TCP to Modbus RTU Gateway SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 93 Communication 2.4 Modbus TCP to Modbus RTU Gateway Parameterization of the Modbus Gateway You can find detailed information on parameterizing the Modbus gateway in the SICAM Q100 device manual, Communication chapter 8. NOTE The Modbus RTU master and the Modbus gateway function can be operated in parallel.

  • Page 94: Communication Protocol Iec 61850 Server

    “International Standard IEC 61850”. The device supports IEC 61850, Edition 2. You can find the following information about the communication protocol IEC 61850 server of the SICAM Q100 in separate documents under https://www.siemens.com/sicam-q100: • Logical nodes (Reporting of operational values) •...

  • Page 95: Application Examples For Communication With Subdevices

    Modbus UDP and via External Ethernet Switch with the Control System When using a Y-cable and the internal Ethernet switch of the device, you can connect the SICAM Q100 with the SICAM I/O Unit 7XV5673. The second terminal of the Y-cable allows you to connect this device combination to the control system using an external Ethernet switch.

  • Page 96: Communication Of The Sicam Q100 Devices With The Sicam I/O Units (Subdevices) Via External Ethernet Switches And Modbus Udp

    Connecting the SICAM Q100 with the SICAM I/O Unit and the Control System via External Ethernet Switch NOTE During a firmware update of the SICAM Q100, the communication between SICAM Q100 and the SICAM sub- devices is stopped. SICAM Q100, 7KG95xx, System Manual...

  • Page 97: Connection With Sicam Pqs

    Connection with SICAM PQS (Version V8.03 SICAM PAS PQS and Higher) General Licensing SICAM PQS Downloading the IID File from SICAM Q100 Settings in SICAM PQS Viewing Measured Values in Value Viewer Graphic Display in PQ Analyzer SICAM Q100, 7KG95xx, System Manual...

  • Page 98: General

    3.1 General General The data acquired by SICAM Q100 are stored in the internal memory of the device. The data of the measured value recorder, for example mean values, and of the trend recorder are available in the PGDIF data format.

  • Page 99: Licensing Sicam Pqs

    When required: • PQS Scheduled Reporting • PQS Grid Code Evaluation • PQS Fault Locator • PQS Notification • PQS Automatic COMTRADE Export • PQS Automatic PQDIF Export • PQS Automatic REPORT Export SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 100: Downloading The Iid File From Sicam Q100

    3.3 Downloading the IID File from SICAM Q100 Downloading the IID File from SICAM Q100 Before configuring SICAM PQS, download the IID file of SICAM Q100 to a folder on your local PC. Proceed as follows: In SICAM Q100 open the Configure tab  Communication Ethernet.
  • Page 101 Connection with SICAM PQS 3.3 Downloading the IID File from SICAM Q100 ✧ Save the IID file in a folder. Figure 3-4 Saved IID File SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 102: Settings In Sicam Pqs

    3.4 Settings in SICAM PQS Settings in SICAM PQS 3.4.1 Configuration ✧ In SICAM PQS start the UI - Configuration. Figure 3-5 Start UI - Configuration ✧ Select the Configuration tab. Figure 3-6 Configuration Tab SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 103 Select the project and add its system from the context menu. Your own PC will be automatically inserted as the first system and as the full server. Figure 3-7 Inserting the System SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 104 In the navigation window right-click SICAM PAS PQS  Computer name (in the example e312n-002010)  Application  Archive. Figure 3-8 Selecting the Archive ✧ Create a path for the archive. Figure 3-9 Creating the Archive Folder ✧ Click OK. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 105 Connection with SICAM PQS 3.4 Settings in SICAM PQS NOTE The archive is needed to store measurements recorded by SICAM Q100 which enables SICAM PQ Analyzer to present them. In the navigation window right-click SICAM PAS PQS  Computer name (in the example: ✧...
  • Page 106 3.4 Settings in SICAM PQS ✧ In the navigation window right-click SICAM PAS PQS  Computer name (in the example: e312n-002010)  IEC 61850 Client  Interface. Figure 3-11 Selecting the Interface SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 107 Connection with SICAM PQS 3.4 Settings in SICAM PQS ✧ In the Interface window enter a Name. Figure 3-12 Interface Parameters SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 108 In the navigation window right-click SICAM PAS PQS  Computer name (in the example: e312n-002010)  IEC 61850 Client  Interface (in the example: interface designation 3P4W)  Import..Figure 3-13 Import SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 109 Connection with SICAM PQS 3.4 Settings in SICAM PQS ✧ In the folder select the file previously downloaded from device (in the example and then click Open. Figure 3-14 Importing the IID File SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 110 Connection with SICAM PQS 3.4 Settings in SICAM PQS ✧ Select the desired element in the next window (in the example: SICAMQ_00001) by checking the Select column. Figure 3-15 Selecting an Element ✧ Click OK. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 111 Figure 3-16 Entries NOTE The fault records can be displayed in PQ Analyzer. Additionally, fault records can be forwarded via PQS Au- tomatic Export and PQS Notification and displayed by SICAM Diamond. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 112 Connection with SICAM PQS 3.4 Settings in SICAM PQS ✧ You execute the assignment of measuring channels for the SICAM Q100 as following: Figure 3-17 Measurement Assignment ✧ Select SLOW_ for Slow Scan Recorder and CONT_ for Continuous Recorder. SICAM Q100, 7KG95xx, System Manual...

  • Page 113: Updating The System

    Start UI - Operation ✧ Click Update system. Figure 3-19 Updating the System NOTE After the update has been completed successfully, the entries in the navigation window are displayed with a blue icon. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 114 In the navigation window right-click your Computer name and subsequently Start all. Figure 3-20 Starting the System The current system status is displayed in the following window. Figure 3-21 Current System Status SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 115: Viewing Measured Values In Value Viewer

    Start the Value Viewer in SICAM PQS. Figure 3-22 Selecting Value Viewer After starting the Value Viewer, the up-to-date measured values are displayed in a table. Figure 3-23 Measured Values Display in Value Viewer SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 116: Graphic Display In Pq Analyzer

    The PQ Analyzer window opens with a list of the COMTRADE data. ✧ Select the fault record you want to display graphically and click open. Figure 3-25 Window of the PQ Analyzer ✧ Click Open. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 117 Connection with SICAM PQS 3.6 Graphic Display in PQ Analyzer The selected fault record is displayed. Figure 3-26 Display of a Fault Record SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 118 Connection with SICAM PQS 3.6 Graphic Display in PQ Analyzer SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 119: Glossary

    Daylight Saving Time Ethernet Cable-based data network technology for local data networks Firmware: Program code for execution in a microcontroller Gateway Enables networks based on different protocols to communicate with each other SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 120 Modbus Remote Terminal Unit: Modbus protocol type for transmitting data over serial networks (for example RS485) Modbus TCP Modbus Transmission Control Protocol: Modbus protocol type for transmit- ting data as TCP/IP packets; TCP port 502 is reserved for Modbus TCP. SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 121 IP addresses the device searches in its own network and which IP addresses it tries to reach via routers in other net- works. TCP/IP Transmission Control Protocol/Internet Protocol: Family of network proto- cols SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 122 Glossary SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

  • Page 123: Index

    Exception Responses 18 User Information 9 IP Address 13 Value Viewer 115 Licensing SICAM PQS 99 Mapping Documentation 22 Modbus 18 Modbus Functions 18 Modbus RTU Master 86 Modbus RTU Master Diagnosis 88 SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...
  • Page 124 Index SICAM Q100, 7KG95xx, System Manual E50417-C1040-C522-A8, Edition 09.2020...

Table of Contents