Installing a DC input power cable (using metal cold forming contacts)
Positive metal contact
Negative metal contact
Recommended: PV cable
(PV1-F) with a cross-
sectional area of 4 mm
Installing a DC input power cable (using metal stamping forming contacts)
Positive metal contact
Negative metal contact
Recommended: PV cable
(PV1-F) with a cross-
sectional area of 4 mm
UTXTC0005 (Amphenol)
Ensure that the cable
cannot be removed after
crimped.
2
.
H4TC0003 (Amphenol)
Ensure that the cable
cannot be removed after
2
crimped.
.
Ensure that cables
are connected
correctly and that
the voltage does not
exceed 1100 V DC.
Ensure that cables
are connected
correctly and that
the voltage does not
exceed 1100 V DC.
9
Positive connector
Negative
connector
Click
Ensure
that the
locking nut
is secured.
H4TW0001
(Amphenol)
Positive connector
Negative
connector
Click
Ensure
that the
locking nut
is secured.
H4TW0001
(Amphenol)