Yamaha MIXING CONSOLE Owner's Manual page 271

DIST->DELAY
One input, two output distortion and delay effects in series.
Parameter
DST1, DST2, OVD1,
DST TYPE
OVD2, CRUNCH
DRIVE 0–100
MASTER 0–100
TONE –10 to +10
N. GATE 0–20
DELAY 0.0–2725.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
DLY.BAL 0–100%
SYNC OFF, ON
1
DLY.NOTE
2
MOD.NOTE
1.
tempo setting)
2.
MULTI FILTER
Two input, two output 3-band multi-filter (24 dB/octave).
Parameter
TYPE 1 HPF, LPF, BPF
TYPE 2 HPF, LPF, BPF
TYPE 3 HPF, LPF, BPF
FREQ. 1 28.0 Hz–16.0 kHz
FREQ. 2 28.0 Hz–16.0 kHz
FREQ. 3 28.0 Hz–16.0 kHz
LEVEL 1 0–100
LEVEL 2 0–100
LEVEL 3 0–100
RESO. 1 0–20
RESO. 2 0–20
RESO. 3 0–20
Range
Distortion type (DST = distortion, OVD = overdrive)
Distortion drive
Master volume
Tone control
Noise reduction
Delay time
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Modulation depth
Distortion and delay balance (0% = all distortion, 100% = all
delayed distortion)
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine DELAY
Used in conjunction with TEMPO to determine FREQ.
Range
Filter 1 type: high pass, low pass, band pass
Filter 2 type: high pass, low pass, band pass
Filter 3 type: high pass, low pass, band pass
Filter 1 frequency
Filter 2 frequency
Filter 3 frequency
Filter 1 level
Filter 2 level
Filter 3 level
Filter 1 resonance
Filter 2 resonance
Filter 3 resonance
Effects Parameters
Description
(Maximum value depends on the
Description
01V96—Owner's Manual
271