Philips 5000 Series Manual page 12

12
English
1
Twist the shaving head to remove it from the handle.
2 Insert a flat-head screwdriver under the rim of the panel and pry off (Fig. 5).
3 Remove the two screws from the top with a torx or flat-head screwdriver (Fig. 6).
4 Slide the front shell off (Fig. 7).
5 Break the bridge on top with a wire cutter (Fig. 8).
6 Insert a flat head screwdriver on either side of the shaver body to release the
hooks (Fig. 9).
7 Slide the power unit out of the body (Fig. 10).
8 Bend the snap hooks aside and remove the transparent cover of the power unit
(Fig. 11).
9 Lift out out the battery holder and cut the wires with a pair of cutting pliers or
scissors (Fig. 12).
10 Bend the battery tags aside with a pair of cutting pliers or a screwdriver (Fig. 13).
11 Remove the rechargeable battery.
Warranty and support
If you need information or support, please visit www.philips.com/support or read
the international warranty leaflet.
Warranty restrictions
The shaving heads (cutters and guards) are not covered by the terms of the
international warranty because they are subject to wear.
Trademarks
Apple, the Apple logo, iPad, and iPhone are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc.
Android is a trademark of Google Inc. Google Play and the Google Play logo are
trademarks of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Philips Personal Care is under
license.