62
Chapter 6—Quick Locate
Locating the LAST REC IN & OUT Points
The LAST REC IN and OUT points are typically used to mark the punch-in and
punch-out points for recording and rehearsal, but can also be used as general locate
points.
While holding down the [SET] button, press the [IN] button to set the IN
1
point, or the [OUT] button to set the OUT point.
When a point is set, the corresponding indicator (IN or OUT) lights up. See "Setting
the LAST REC IN & OUT Points" on page 71 for more information about setting the
LAST REC IN and OUT points.
Press the LAST REC [IN] or LAST REC [OUT] button to locate the IN or OUT
2
point respectively.
When the LAST REC [IN] or [OUT] button is pressed during playback, the stored
point is located, and then playback continues.
D24—Owner's Manual
LAST REC IN
Current
point
position
IN
OUT
LAST REC OUT
point