Page 1
Panel (4 way cassette type) Air Conditioner installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register DB98-32728A(1) Panel Global 4way_IM_E 32728-1.indd 7 2010-11-04 오전 11:16:18...
Page 2
1. Open the electrical component box cover. A fter untightening the screws, slide the electrical component box cover in the direction of the arrow as shown in the figure and pull it down. 2. Push the switch type handles inward and pull the grille to open. H andles are located on the left and right side of the Samsung logo on the grille. Y ou may have to open the air flow blades first in order to find the handles. There is no need to detach the grille for the installation of the panel.
Page 3
3. Install the panel using 2 hooks on the both sides of the indoor unit. Hook 4. Detach the 4 corners of the panel. Use two grooves on the each corner of the panels when pulling them out. Groove H andle the corner with digital display gently, since there are ...
Page 4
For 4 way cassette 7. Close the electrical component box cover and tighten the screws. 8. Attach and close the front grille. M ake sure the hooks on the rear side of grille fits properly into the grooves on panel ( ) and then push the panel to close ( ). Hook Grille 9. Check out that the panel is fixed to the indoor unit. F ix screws tightly between the panel and the surface of the ceiling.
Page 5
Memo Panel Global 4way_IM_E 32728-1.indd 5 2010-11-04 오전 11:16:17...
Page 6
Panel Global 4way_IM_E 32728-1.indd 6 2010-11-04 오전 11:16:18...