Related Manuals for Samsung MIM-H04U
Summary of Contents for Samsung MIM-H04U
- Page 1 Air conditioner User & installation manual Wi-Fi Kit 2.0 MIM-H04U • Thank you for purchasing this Samsung Product. • Before operating this unit, please read this manual carefully and retain it for future reference.
-
Page 2: Table Of Contents
Downloading the SmartThings app and registering your Samsung account ......14... - Page 3 California Proposition 65 Warning (US) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov. This installation manual explains how to install a Wi-Fi Kit to an indoor unit of Samsung system air conditioners. Read the installation manual thoroughly before installing the Wi-Fi Kit.
- Page 4 Safety precautions CAUTION • • Do not install the product in a place where it will be exposed to oil or vapor etc. - If the product is used in a place where it is exposed to oil, vapor or sulphur dioxide, parts of the product may get damaged or product may function abnormally.
-
Page 5: Accessories
Checks before Installation Accessories Wi-Fi Kit User & installation manual • CAUTION • Before installation, be sure to cut off power. • Follow applicable rules for electrical wiring. Make sure that the cables of the Wi-Fi Kit are installed inside a wall or covered to avoid being touched by the occupant. External Dimensions [Unit : mm (inch)] 185 (7.28) -
Page 6: Wi-Fi Kit Installation
Installing the Wi-Fi Kit Wi-Fi Kit installation • To ensure smooth operation, there should be no obstacle between the Wi-Fi Kit and wireless router that may interfere with communication. When the Wi-Fi Kit is too far from a router or there are CAUTION potentially interfering elements between them, it may cause problems with the performance of the Wi-Fi Kit that cannot be resolved by customer services. - Page 7 communication cables (F1, F2) to the terminals on the back of the front cover while adjusting to a suitable length. • You can connect up to 16 indoor units to a Wi-Fi Kit. NOTE [Unit : mm (inch)] Indoor unit 10 (0.4) and over 10 (0.4) and over Wi-Fi Kit...
- Page 8 Installing the Wi-Fi Kit Wi-Fi Kit wiring diagram Connecting to a single outdoor unit (F1-F2) F1 F2 <Connection between the Wi-Fi Kit and multiple units> SUB PBA (MIM-A00) COM2 RED : Don’t use it BLU : Don’t use it...
- Page 9 F1 F2 • When installing the Wi-Fi Kit, use proper electrical cables considering the size of the wiring hole on CAUTION the wall. • Upon wiring, use the provided U-type terminals (#16-22). When there are no terminals provided or • Wi-Fi Kit communication and power cables (approx.
-
Page 10: Checking The Wi-Fi Kit
Installing the Wi-Fi Kit 6. Activate the Wi-Fi Kit. • When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely. • After the system operates, tracking is performed automatically. 7. Tracking Tracking: The Wi-Fi Kit detects connected indoor unit(s) and the indoor unit(s) detects the connection to the Wi-Fi Kit. -
Page 11: Initializing The User Data
Item LED indication Wi-Fi connection Wi-Fi setting Searching AP (AP mode) Tracking units Blinking Blinking Blinking Inspection of the network PBA Blinking Blinking required User authentication required Blinking (AP mode) Downloading Rescue mode Blinking Blinking Wi-Fi Off Blinking * If the "Rescue mode" indication appears on the LED: - Reset the Wi-Fi Kit using the "Reset"... -
Page 12: Updating With A Micro Sd Card
Installing the Wi-Fi Kit Updating with a Micro SD card • Updating with a Micro SD card is only for installer. CAUTION Type Capacity File system Micro SD Max 4GB FAT16 Micro SDHC Max 32GB FAT32 1. Create a folder named “update" in the Micro SD card. Copy the latest software image and paste it into the folder created in the Micro SD card. -
Page 13: Checking The Power Connections
SmartThings app To use the SmartThings app, connect the product to the network in the sequence described below. The images shown may differ depending on your smartphone model, OS version and manufacturer. You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE or more wireless networks. -
Page 14: Downloading The Smartthings App And Registering Your Samsung Account
2. Registering your Samsung account • A Samsung account is required to use the SmartThings app. To create your Samsung account and log in to your account, follow the instructions displayed on the SmartThings app. You do not need to install an additional app. - Page 15 • If a pop-up window saying that the device is already registered appears during connecting to your product. • If a Samsung account-related country error occurs during connecting to your product, log out of your current Samsung account, log in to your previous Samsung account, and then delete all devices that have been connected previously.
-
Page 16: Controlling The Air Conditioner
Starting the system air conditioner app Controlling the air conditioner Below are functions that you can control or monitor using the Wi-Fi adapter. Category Function Description Desired Temp Displays the desired temperature. Current Temp Displays the current temperature. Monitoring Filter warning Defrost Appears in the defrost state. - Page 17 • You cannot add any device without deleting it once the device has already been added to the SmartThings app. To add the connected • If you are using a Samsung smartphone, the server may not be connected temporarily. Turn off and on the power of the Wi-Fi Kit,...
- Page 18 Troubleshooting Symptom Measure • The communication error is encountered between the indoor unit and Wi-Fi kit. Check the communication cables (F1/F2). • After installing the Wi-Fi kit, the addresses of the indoor/outdoor units may be changed. If the problem persists after checking the communication cable, keep the following steps: The SmartThings app displays the error number, 628.
- Page 19 It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal charge will be required. The following URL http://opensource.samsung.com/opensource/WIFIKIT_R18_TZ4/seq/0 leads to the download page of the source code made available and open source license information as related to this...
- Page 20 Reference 1) FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 21 ICES-003 Issue 6 Samsung Electronics Co., Ltd. Manufacturer (Maetan dong) 129, Samsung-ro, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do 16677 Korea conforming to the applicable FCC Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commission’s requirements.
- Page 22 Memo...
- Page 24 Responsible Party – U.S. Contact Information Contact phone number 776 Henrietta Creek Road #100 Roanoke, TX 76262 888-699-6067...