Troubleshooting - Yamaha 2 EZ-AG Owner's Manual

Troubleshooting

Problem
No sound.
The displays flicker on and off and don't function
normally.
Song playback will not start.
The EZ-AG is picking up noise.
24
EZ-AG
Are the batteries properly installed? Are they run down?
Is the volume set to "0"?
Is a plug plugged into the PHONES/OUTPUT jack? Speaker output
is automatically cut off when a plug is inserted into the PHONES/
OUTPUT jack.
Is Local Control turned OFF? The EZ-AG will not produce any sound
unless Local Control is turned ON.
Are the batteries run down?
Is the MIDI clock set to "Etr"? Try setting it to "Int".
Are you using the EZ-AG near a mobile phone? Try turning the mo-
bile phone off or moving it further away from the EZ-AG.
Check