Connecting To A Computer - Yamaha 2 EZ-AG Owner's Manual

Connecting To a Computer

The EZ-AG can be connected to a computer via MIDI.
G To connect the EZ-AG to a computer that is equipped with USB connec-
tors use a USB-MIDI interface such as the Yamaha UX16, as shown in
the diagram below.
To the EZ-AG
MIDI IN connector.
To the EZ-AG
MIDI OUT connector.
EZ-AG
G The EZ-AG can be directly connected to a computer that has built-in
MIDI connectors via standard MIDI cables, as shown in the diagram
below.
MIDI IN
MIDI OUT
EZ-AG
G To connect the EZ-AG to a Macintosh computer that has RS-422 ports
(the serial Printer and Modem ports) use a MIDI interface as shown in
the diagram below.
MIDI IN
MIDI OUT
EZ-AG
USB-MIDI
Interface
MIDI OUT
UX16
MIDI IN
MIDI OUT
MIDI IN
Computer
MIDI Interface
MIDI OUT
Modem Port
MIDI IN
Connecting To MIDI Devices
• If you use the Yamaha UX16, be
USB
Computer
• When using a separate MIDI
Macintosh
sure to install the supplied driver
on your computer.
interface with a Macintosh com-
puter as in this example, be sure
to set the clock speed of the
interface from the computer
using the appropriate application
software. See your software
manual for details.
EZ-AG
21